|
|
|
Thursday, 1 August 2019 | Dereel → Napoleons → Dereel | Images for 1 August 2019 |
Top of page | ||
next day | ||
last day |
DSLRs revisited
|
Topic: photography, opinion | Link here |
My Olympus E-30, serial number G69501426, has arrived already, coincidentally exactly 9 years since my last SLR and almost exactly 27 years since I bought my last “real” SLR (one that I intended using), the Pentax Z1, so in to Napoleons to pick it up.
It was in quite good condition, even with a really clean monitor display, something that caused me problems with its predecessor. The reason is clear: it has hardly been used. The secret menus show a sum total of 1,295 shutter releases (interestingly, 176 with flash; with this camera I once again have a camera with built-in flash). Other interesting parameters are MCS 4073901000 (“this is an E-30 mumble”) and 711001 (“This camera was built in November 2007”). That's rather earlier than I expected based on the serial number: my first E-30 was bought in May 2009 and had a considerably lower serial number, but then clearly the number has two parts:
Camera | Serial | Prefix | Real serial | |||
Old E-30 | G67502432 | G675 | 2432 | |||
“New” E-30 | G69501426 | G695 | 1426 |
But there's another reason why it's strange: the E-30 wasn't announced until 5 November 2008. So why is the build code a year older? Could it be that some of the components were common with the Olympus E-3, which was introduced a year earlier? Either way, it seems that the E-30 wasn't exactly the most-built camera of the last couple of decades, but also that the last 4 digits are the real serial number. So what's the difference between G675 and G695? Some geographical code, maybe?
All of the above is incorrect, based on a misinterpretation of the MCS value. As Biofos states, the date of manufacture is encoded in bytes 4 to 6 of MCS, 901. So the camera was made in January 2009.
But it forgets the time when the battery is removed, just like the Olympus E-PM1 that I bought 2½ years ago. It came with a Zuiko Digital ED 14-42 mm f/3.5-5.6 lens, serial number 212721917, and a Zuiko Digital 40-150mm f/3.5-4.5 lens. Look at that aperture at 150 mm! It's actually the biggest I have, and it seems that there's also a cheaper version with f/4-f/5.6. But I've never seen much use for a lens of this range, and I doubt that I'll use it much.
OK, setup... haven't I forgotten a lot of things? Upgrade the firmware, try it out. What a horrible, tiny, dim viewfinder! Yet DSLR users claim that their viewfinders are better than on mirrorless cameras. And what a noise it makes! Autofocus is also nothing spectacular. With lenses designed for it, such as the Zuiko Digital ED 12-60 mm f/2.8-4.0 SWD, it's not clear that it's even as fast as the E-M1 with the same lens.
Still, for the purpose I need it for (Analemma photography) it should do the trick. It also came with quite a nice camera bag.
First Hellebore!
|
Topic: Stones Road house, gardening | Link here |
Since moving to Stones Road, our Hellebores have not been doing at all well. They barely flowered four years ago:
![]() |
|
Since then they seem to have been going through various phases of not-quite-dying. I had guessed that they didn't like the soil in which they were planted, and in January I transplanted them to the front of the house. That seems to have helped: today we had the first flowers on a plant that didn't look sick:
![]() |
|
Hopefully they'll do well now.
The daily NBN outage
|
Topic: technology, opinion | Link here |
Something went wrong with the National Broadband Network “planned outages“ today: there was none. But they made up for it by inventing some “unplanned outages” (clearly a concept they're not used to). Today I got no less than five messages from Aussie Broadband:
Date: Thu, 1 Aug 2019 15:23:13 +1000
From: Aussie Broadband <support@aussiebroadband.com.au>
Subject: nbn Unscheduled Outage
NBNCo has let us know that your service at 29 STONES RD, DEREEL VIC may currently be affected by an outage.
NBN comments
01/08/2019 03:12pm AEST - nbn is investigating a network incident that is impacting services running from the Fixed Wireless POIs (Point Of Interconnect) in Ballarat, Cranbourne and Traralgon, VIC.
Network Engineers are currently performing remote troubleshooting, and nbn will provide updates as the situation progresses.
You can check the current status of this outage in the MyAussie App or Portal.
We will let you know once this outage has been resolved.
Date: Thu, 1 Aug 2019 15:33:50 +1000
Subject: UPDATED: nbn Unscheduled Outage
(content unaltered)
Date: Thu, 1 Aug 2019 16:54:47 +1000
Subject: UPDATED: nbn Unscheduled Outage
NBN comments
01/08/2019 04:20pm AEST - Network Engineers have advised that services have restored and they are now performing final health checks on the network.
Once network stability is confirmed, nbn will send out a final confirmation and close this ticket.
01/08/2019 03:12pm AEST - nbn is investigating a network incident that is impacting services running from the Fixed Wireless POIs (Point Of Interconnect) in Ballarat, Cranbourne and Traralgon, VIC.
Date: Thu, 1 Aug 2019 17:10:04 +1000
Subject: RESOLVED: nbn Unscheduled Outage
Dear Greg,
NBNCo has let us know that the outage affecting your service at 29 STONES RD, DEREEL VIC has been resolved.
If you are still having issues with your internet, please try restarting your modem/router. If your service is still not working after that, you can try some of the troubleshooting tests on your MyAussie app/portal, or give our support team a call on 1300 880 905.
Date: Thu, 1 Aug 2019 17:35:46 +1000
Subject: UPDATED: nbn Unscheduled Outage
Dear Greg,
NBNCo has let us know that your service at 29 STONES RD, DEREEL VIC may currently be affected by an outage.
NBN comments
01/08/2019 04:58pm AEST - nbn advises that upon further investigation, it has been noted by Network Engineers, that although alarms appeared showing that there was service impacting outage, there was no impact to end users' connection.
Therefore nbn have cancelled this Network Incident ticket.
It's easy to laugh at this, especially since there was no kind of outage. But this is the very first time in over 5 years that I've received any indication that the NBN is working on an unscheduled outage.
US sanctions against Javad Zarif
|
Topic: politics, opinion | Link here |
The USA (or rather its supreme leader, Donald Trump) have imposed sanctions against Mohammad Javad Zarif, the Foreign minister of Iran. The reasoning? “Mr Mnuchin described Mr Zarif as the Iranian "regime's primary spokesperson around the world"”
IDIOTS! That's his job! Are they really that stupid? Or is the reasoning fake news?
Friday, 2 August 2019 | Dereel | Images for 2 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Qantas pain, try 2
|
Topic: general, technology, opinion | Link here |
It's been a couple of weeks since I last tried to book a flight on Qantas using my frequent flyer points. The time of the flight is coming closer; time to finally do something. The real problem is understanding what the silly names for their pricing mean:
|
What's “Red e-Deal”? “Flex”? “Business” is clear, but the flights we're looking at don't offer it. I hadn't been able to find it on the web site, so I had to call them to find out. Spent an inordinate amount of time trying to find the phone number (which I should have noted last time I called them; it's 13 11 31, but there's also a number 03-9658-5302 “for overseas callers”. Called them up and was asked to enter my frequent flyer number and PIN. Dammit, where is it? Hung up, tried again. “A PIN was not recognised”. Huh? Check again. They want a # at the end, presumably because the software doesn't know how long a PIN is. Tried again. Same thing.
Gradually it occurred to me that the error message was wrong. Not “A PIN was not recognised”, but “That's not the correct PIN”. That was the old one that they had expired last month. Try again with the new PIN. “The estimated wait time is 2 hours”. 2 hours! And this for an enquiry made necessary because of their web site breakage, and from one of their most esteemed passengers (not me personally, clearly, but frequent flyers in general). I was able to leave a message to be called back, so did that and hung up at 10:27.
No call back after 2 hours. No callback after 3 hours. Finally, at 14:19:29, 3¾ hours later, I got the callback. But no, just joking, we've put you at the front of the queue, so you only have a 2 minute wait.
Finally connected to a barely intelligible Leuren (if I got the spelling right). What did they do to their phone system to make it so unintelligible? But finally I got my answer. Both “Red e-Deal” and “Flex” are exactly the same seats. The only difference is what happens if you want to change the flights. With “Flex” you can change and only need to (possibly) pay any difference in flight price. With “Red e-Deal” you will also have to pay a premium in points.
And how do I find this out from the web site? Simple: choose one and you'll be shown the terms and conditions (presumably only for the one you select). Leuren appeared to think that this is perfectly normal. The good news is that all “Qantas flights” include 20 kg of checked baggage. The one I'm looking at is Jetstar, but it seems that what they really mean is that any flight booked via this page comes with the 20 kg allowance.
What a company! If they treat their preferred guests like that, how do they treat the rabble? When I stopped flying 13 years ago I stopped for reasons far less than this appalling treatment.
In fact, it seems that there is now a link from these descriptions that shows details for the buzzword (and only that buzzword). Why didn't I see it before? Why didn't Leuren know about it? My only guess is that it's nowhere near where I was looking:
|
Digitalocean: torture our customers
|
Topic: technology, opinion | Link here |
Qantas isn't the only company who seems to want to torture its customers. Got a message from DigitalOcean today: my credit has been used up, and I need to top it up. OK, log in. CAPTCHA: “Are you a robot?”. No, not today. “OK, recognize these buses, please”, including 12 fuzzy images that could be any kind of motor vehicle. FAIL. Oh, no, they were too polite to say FAIL, it just started all over again without explanation. Try a different browser? Traffic lights? Three browsers, three attempts to guess what their fuzzy images meant. Fail. Then I got email with a 6 digit code. At least that worked, and I was transferred to PayPal, which hiccoughed and then transferred $10 for me.
That, of course, had its consequence. By this time I was on my third browser, which caused PayPal to consider it to be a “device” and send me a message:
OK, I'd like to rate that very low. I didn't ask for activation of a TMon (their representation of ™on). But, strangely, this message was in (mutilated) text only. And clearly the URL had been quoted not once (" " → %20, etc), but twice (" " → %20 → %2520). Tried to recover the URL, but failed.
Are companies trying to make life hard for their customers? Maybe it's time to migrate from DigitalOcean. Sent a support request stating so, but got no reply.
Another week of NBN outages
|
Topic: technology, general, opinion | Link here |
Somehow I'm getting far too many of these:
NBNCo has let us know that they are planning network maintenance in your area, and that your service at <strong>29 STONES RD, DEREEL VIC</strong> will be affected.<br>
The details are:
- Start date and time: Mon 19th August 2019 07:00 AEST
- End date and time: Mon 26th August 2019 20:00 AEST
- Window: 181.0 hours
You may experience the following interruptions during the maintenance
- 480 min
- 480 min
- 480 min
- 480 min
- 480 min
That's another 40 hours of “planned maintenance” spread over 6 working days. Are they ever going to stop?
Anke Hawke visits again
|
Topic: general | Link here |
Anke Hawke along for a couple of days to hold a clinic at Chris Bahlo's place. She, too, has a cold. Spent the evening looking at some videos that Yvonne took, noting that the M.Zuiko DIGITAL ED 7-14 mm f/2.8 PRO includes enough of the ground and the sky to skew the exposure. Looks like a case for manual correction.
New mixer tap head
|
Topic: Stones Road house, general | Link here |
The new mixer tap head has arrived. Now for the fun: put the new hose in position under the sink:
![]() |
|
![]() |
|
![]() |
|
The pull-out hose is at the bottom of the joint, but the threaded end looks different:
![]() |
|
Is it the same size? I'd be really jumping for joy if I disconnected the old union and discovered that the new one didn't fit.
Fortunately, and to my surprise, I was able to remove the broken end of the old head from the other end of the hose, and the new head just fitted straight in. The whole thing only took a few seconds.
Saturday, 3 August 2019 | Dereel | Images for 3 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Anke Hawke clinic
|
Topic: photography, multimedia, animals, opinion | Link here |
Over to Chris Bahlo's place today to take video of the Anke Hawke clinic. My main interest here was to finally get some good audio in the recordings. I've had the microphone setup for over a year now, but I haven't had any good recordings: somehow the batteries failed on me every time. Today I bit the bullet and used alkaline batteries, and it worked:
That's pretty boring, of course; parallel to this I had another camera for taking closer clips, but this one was supposed to record the complete sound track.
And the results? Much better than just with the camera. Here's one of the parallel recordings with only camera:
But it's very clear that each person had one microphone (Anke right, Chris left looking into the camera). I need to find ways to merge things.
Optimizing hot water
|
Topic: general, technology, opinion | Link here |
So my new hot water system runs off electricity, not solar heat. And I have a photovoltaic power system that sometimes generates more power than it can get rid of. Wouldn't it make sense to use that excess power to heat the water?
Yes, of course, but how? The instructions suggest that there's some kind of communication system that can communicate with some kinds of inverter, but they make a number of assumptions, notably whether the inverter can know when it can discard energy. Probably it can: after all, it has to limit the power output to what the grid owners will allow, so it's clear when that is. But how does anything know when this situation will arise, and how low may the water temperature fall before the system heats without excess power being available? And in my particular case, of course, the circuit breaker for the hot water system is nowhere near the inverter.
Qantas pain, continued
|
Topic: technology, general, opinion | Link here |
So finally I'm in a position to book my Qantas flights for Yvonne. Established which ones she wanted, selected them—I was right! I was only given the terms and conditions for this specific kind of flight. And then? Where's the CONTINUE button?
![]() |
|
Just some unrecognizable credit card icons and GO TO JETSTAR.COM >. None seemed to make any sense. But then I paged up through the random nonsense that they put on the page and found:
|
In other words, “Ha, ha, only joking”. And of course there is no “Continue to Jetstar”; presumably they meant GO TO JETSTAR.COM >. Did that and had to start all over again. Different prices, different conditions!
![]() |
|
Gone the 20 kg baggage allowance, but for “6,714pts” you can get it, and then for another $15 you can get an in-flight meal!
OK, we had established that Yvonne can get by with 7 kg carry-on baggage. Continue. Can't find the return flight. Oh. The flight was from Tullamarine, but the return flight was to Avalon. Qantas doesn't have any issue with that, but Jetstar does. That's a “multi-city” flight.
OK, select that (sigh). Click CONTINUE and get:
|
I think this is the first time I have ever seen a SIGSEGV on a web site. And, of course, it was repeatable.
Back and tried again. But no, one chance is all you get. Now I have an EPERM:
|
I thought things were bad yesterday, and arguably it was my fault for not reading every last detail of the page and following all links. But now I have:
I wonder if this is a browser sensitivity. But do I care? Now how do I sell my 350,000 odd Qantas frequent flyer points? I certainly don't want to have to go through this again.
Clinic dinner
|
Topic: food and drink, general, opinion | Link here |
Had a number of people from the clinic around for dinner tonight:
![]() |
|
![]() |
|
![]() |
|
Apart from Anke and Chris Bahlo (of course!) we had Nele Koemle and Katherine, a young girl whom she had brought with her, thus meaning that we had to speak English.
Katherine sounded like she was British: everything we offered was disgusting. Well, only something in the hors d'œuvres and the truffles in the chicken. For good measure, “Jewish artichokes” (not on the menu) are also disgusting. Jerusalem artichokes, maybe? Ah, yes, Jerusalem artichokes. They're nothing like real artichokes. Never mind, real artichokes must be disgusting too.
One thing that was clearly not disgusting were the chips. Normally I measure 100 g for most people and 70 g for Yvonne, but that's with just the one course. How many with three courses and another side dish? I guessed at 80 g per person, which was definitely not too much.
We had two chickens with truffles (from an absent Margaret Swan) under the skin. Each weighed about 1.7 kg, which according to my cooking time page should have taken about 90 minutes at 180°. But I didn't cover the breast, and it was “done” (80°) in 75 minutes. Also a little on the overdone side. Back to 78° again?
The usual fun after dinner:
![]() |
|
![]() |
|
![]() |
|
Sunday, 4 August 2019 | Dereel | Images for 4 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Clinic ends
|
Topic: general, multimedia, photography | Link here |
Today was the second and last day of the Anke Hawke clinic. I was only indirectly involved, processing the videos from yesterday. I have a big can of worms to open, notably relating to audio processing in videos.
When did I build that kernel?
|
Topic: technology, opinion | Link here |
In the last few years, the identification of FreeBSD kernels has changed:
=== grog@eureka (/dev/pts/19) ~ 4 -> uname -a
=== grog@teevee (/dev/pts/4) ~ 48 -> uname -a
It's not clear when the second kernel was built—and that's part of the problem. Yes, I can look at the modification timestamp:
=== grog@teevee (/dev/pts/4) ~ 55 -> l -T /boot/kernel/kernel
But why have things changed? The old way provided much more information. Callum Gibson discovered that he could get it both way, and finally he found a link to an entry in /usr/src/UPDATING for 20180913:
20180913:
Reproducible build mode is now on by default, in preparation for
FreeBSD 12.0. This eliminates build metadata such as the user,
host, and time from the kernel (and uname), unless the working tree
corresponds to a modified checkout from a version control system.
The previous behavior can be obtained by setting the /etc/src.conf
knob WITHOUT_REPRODUCIBLE_BUILD.
OK, that makes sense, up to a point. But it clearly comes from the viewpoint of a release engineer. And how many of them are there? What we really want is an entry WITH_REPRODUCIBLE_BUILD in /etc/src.conf (a file that I have never used) for those who want that kind of repeatability, and by default it should be disabled. As it is, I suspect that the vast majority of people who install from binary images will get this truncated information.
Monday, 5 August 2019 | Dereel → Ballarat → Dereel → Ballarat → Dereel → Ballarat → Dereel | Images for 5 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Coronary angiogram
|
Topic: health | Link here |
Up in the middle of the night to take Yvonne to the St John of God hospital for a coronary angiogram, slated to take the entire day (and a night if they found something that they needed to fix). Somehow made it there (15 minutes too early) and back in under an hour.
I had barely started breakfast (10:30) when Jacinta from St John's called to say that Yvonne was finished, that they had not found anything, and that I could pick her up any time between now and 12:30. Got directions—not the first time I've been lost in that hospital—and headed there to arrive at 12:30.
OK, in the lift, third floor, straight ahead. A wall. Looked around and found everything blocked to visitors. Ah, I had taken the wrong lift. Back to the ground floor, up the other lift, and without too much difficulty found Yvonne, who wasn't allowed to leave until 12:55, apparently to avoid bleeding from the point of entry of the catheter.
Frijoles de la olla: ¿Como?
|
Topic: food and drink, opinion | Link here |
Time to make some more frijoles de la olla. For the first time, I have fresh epazote to put in. But how much? It's powerful smelling stuff. The only recipe I could find specified “a sprig” for 375 g of beans.
Off to Youtube to look for recipes, in the process learning something about vowel shifts in Mexican Spanish. And every recipe was different! Some of the recipes also looked quite dubious, but it's clear that any dish as widespread as frijoles de la olla has to have many different recipes. I'll have to soak the beans overnight, but tomorrow I intend to take a significant part of one of my plants, but to omit garlic (which I can't taste in the result, and which isn't in any of the recipes I found) and fat. And since some of the recipes use green tomatoes, I finally have something to do with the green tomatoes that I froze a couple of years ago.
To the doctor again
|
Topic: health, opinion | Link here |
Into town in the afternoon—the third time today, making over 200 km—to see Dr Paul Smith, revelling in his new stethoscope—it seems that he has had his old one, which has finally given up the ghost, since he entered into medical school. As I said, clearly he's now a Real Doctor.
Both the stethoscope and the results of the chest X-ray showed nothing of interest except for an enlarged heart, which didn't concern him, though I should have asked in more detail. So the coughing could go on for a while (though it's already much better than last week), but no need for any further treatment. Thank God!
Hello world
|
Topic: general, food and drink | Link here |
I now have a new debit card from Transferwise, marked “Hello world” (apparently a punctuation-free representation of the text on the back, “Bye bye banks, hello world”). The special thing about it: I can pay in any currency and get extremely low exchange rates. First use requires PIN entry, so on the way to Paul, stopped in at Harris Scarfe and bought Yet Another frying pan, to replace one whose anti-stick coating has finally given up the ghost.
DigitalOcean: direct insults?
|
Topic: technology, opinion | Link here |
Finally got a response from DigitalOcean to Friday's complaint:
Thank you for contacting DigitalOcean!
Please let us know if there's anything we can help with, and have a wonderful day!
Best Regards,
Conor
Developer Experience Engineer II
Was this reply helpful? Let us know!
What kind of answer is that? Are they deliberately trying to annoy me? Answered, and “let them know”, but it looks as if the only thing keeping me with DigitalOcean is inertia.
Tuesday, 6 August 2019 | Dereel | Images for 6 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Caring for an invalid
|
Topic: health | Link here |
Yvonne is still feeling under the weather after yesterday's coronary angiogram. I hadn't expected that, but it seems to be in the normal range.
What a month it's been! It's been over a month since Yvonne's first heart investigations, and 3 weeks since she got her cold/virus or whatever people call it nowadays. Hopefully things will soon be back to normal.
Dead freezer?
|
Topic: food and drink, opinion | Link here |
Clearly our number 2 freezer is not working well. OK, not to worry, let's put the stuff in number 1 freezer (the oldest, just waiting for this kind of duty). In the process found a number of plastic bags that had fallen down behind the baskets. Is it possible that they blocked the air flow? I suppose I should check things before I call in a repairman.
movavi software
|
Topic: photography, multimedia, technology, opinion | Link here |
So I'm looking for video processing software, and by chance movavi has a 40% off sale. Time to try the stuff out.
I had already tried their photo editor nine months ago, and came to a conclusion that it wasn't useless. So how about the video editor?
Things didn't work well:
|
“your system does not support the necessary OpenGL version". I've seen that before. It's an obfuscatory way of saying “we weren't expecting this program to be run via remote desktop”. Try starting native. Sure enough, it didn't bring that message. Instead I got:
![]() |
|
OK, this is supposed to be a demo version. What do I select? Tried to shoot it down, but the Task Manager didn't want to know:
![]() |
|
OK, no data to save. Shoot it down. Try again. Same thing happened again, of course, so I selected the alternative “Fill in the feedback form and get 40% discount”. OK, you want feedback, I have feedback. But I didn't get the choice, only at the end:
|
|
What language is that? Russian? Why did that happen? But I was still no closer. Finally I selected “Activate”, then “Cancel”, and I was left with a message:
|
OK, ignoring things seems to be the way to go, and I ended up with what I think must be the standard screen:
![]() |
|
What does that mean? Just understanding it requires a lot of effort. Is it worth it? Even if I get it to work now, what are the chances that a future update will break the software?
Wednesday, 7 August 2019 | Dereel → Ballarat → Dereel | Images for 7 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
New microwave oven
|
Topic: general | Link here |
Yvonne is still not allowed to drive, so we both went shopping in Ballarat today. About the only aspect of any interest was the purchase of a new microwave oven, a Sharp R350EW. It's 1200 W instead of 1100 W for the old Panasonic, has 10 power levels (marked in W) instead of 6 silly names (medium low, defrost, low...) on the Panasonic, and it's designed for people who can operate keyboards, rather than the multiple press that the Panasonic wants. Or at least, that's what I thought. You still have to press the power level button up to 10 times to set the correct level.
And the down side? The heating chamber is narrower! It hit me immediately when I saw it on display, but in fact it's only 9 mm narrower (33.7 cm instead of 34.6 cm). And the clock, once again, is only 12 hours. Why? Surely it costs them more to make 12 and 24 hour clocks than to just make 24 hour clocks and let people who want to to restrict it to 12 hours. And the display is far too bright. But we'll live with that.
Chromagen: instant response
|
Topic: Stones Road house, general, opinion | Link here |
While walking the dogs, got a phone call from Chromagen, answering my online request last week, What instant response! Left her with my decided opinions both about their products and their management. “Oh, you won't be needing any help, then?”.
Back home, found a mail message waiting:
OK, follow the link:
![]() |
|
![]() |
|
Look at the URL! And it still wants me to enter the number. OK, for the sake of completeness...
![]() |
|
![]() |
|
Possibly this is because they deleted the request. I'd prefer to see it as a further indication of their incompetence.
Peking duck, ALDI style
|
Topic: food and drink, opinion | Link here |
One of the things that we picked up at ALDI today was a “Peking duck kit”. Who knows, maybe it's not bad. Ate it this evening. Basically it's duck, pancakes and hoi sin sauce, just add spring onion and cucumber.
Amusingly, the meat and the pancakes came with individual expiry dates (the pancakes in October, duck in December). But this is Peking duck?
![]() |
|
No crispy skin there, and clearly not something that I would repeat. But it wasn't too bad, and the pancakes were quite good, saving me a lot of work. Now if they would only sell the pancakes separately.
Thursday, 8 August 2019 | Dereel | Images for 8 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Chinese currency manipulators!
|
Topic: politics, opinion | Link here |
So Donald Trump has complained that China is a currency manipulator. Yes, correct, but in fact his complaint is that China stopped currency manipulation. From this statistic:
the Chinese central bank was criticized for letting the devaluation of its currency happen instead of stepping in, a gesture interpreted by many as a rebuttal for the new round of tariffs announced by Donald Trump late last week.
So which is manipulation? Stepping in or not stepping in? According to currency manipulator,
“Currency manipulator” is a term used by governmental authorities such as the United States Department of the Treasury to designate countries that engage in a certain degree of currency intervention, a monetary policy in which a central bank buys or sells foreign currency in exchange for domestic currency, generally with the intention of influencing the exchange rate and commercial policy.
The US Treasury doesn't make it easy to find its definition of “currency manipulation”, but this page quotes it, along with comments:
According to the UST a country is a currency manipulator when it does the following three specific things:
A significant bilateral trade surplus with the US.(Check! China’s got that.) A material current account surplus of more than 3% of GDP.(China does not have that.) Persistent one-sided intervention in its currency market.(China’s move on Monday doesn’t fit this bill, so no.)
But what do those first two items have to do with currency manipulation? Only the third is currency manipulation. As I see it, the first two moderate the third: it's only currency manipulation if they also apply.
When will the USA get sensible politicians? It seems that Trump still thinks that China is paying his tariffs.
Some little garden work
|
Topic: gardening | Link here |
Almost before I know it, winter is coming to an end, and I haven't pruned the roses. In fact, I didn't prune them at all last year, making it even more urgent. Did a bit of pruning, but soon ran out of energy.
Also planted one of the epazote plants in the north part of the garden. I don't know if it will make it, especially since it's currently so wet, but I have plenty of seeds.
Deep freeze: problem analysis
|
Topic: food and drink, opinion | Link here |
A couple of days ago I established that my malfunctioning freezer had some blockages round the back behind the baskets. Could they have been the cause for the problems? Turned it on again and put a basket of food in there. But once again the fronts of the baskets had frozen condensation on them, suggesting that they had reached 0°. Why? And where does the moisture come from? I'm pretty sure that the seal is OK, and there was nothing moist inside.
Qantas: Begone foul frequent flyer!
|
Topic: technology, general, opinion | Link here |
Another attempt to book Yvonne's flight today, and again, on transferring to http://www.jetstar.com/:
![]() |
|
OK, this is getting urgent. Time to call up Qantas on 13 11 31 and booking it manually. And again the “estimated wait time is over 1½ hours”. Arranged for a callback, which finally occurred after I thought they had forgotten it, somewhat after 3 hours later. Spoke to Elly, a very clearly non-native English speaker, who went offline for 4 minutes to come back and tell me that neither of the flights that I wanted was available. Managed to shut her up long enough to check their web site. Both still on offer:
![]() |
|
No, wrong, start of a long explanation. Sorry, Elly, connect me to your supervisor.
12 minutes later she came back offering me alternative flights. No, I want the ones advertised on their web site. Please connect me to your supervisor now, and tell me that you're going to do so. Finally, on the third request, she said yes, she would connect me to her supervisor.
A quarter of an hour later the phone line went dead.
What's wrong with this company? Before signing off, they did manage to present another error message:
|
Went looking on the Jetstar site, but found very little of help. It seems that you have to pay them just to talk to them on the phone! And there's no evidence that you can access the site with Qantas Frequent Flyer credentials. But their help page offers help: just use live chat.
What live chat? Ah, they're too polite to say, or maybe it's privacy concerns. All I got was another error message, which continued for as long as I could bother looking, though an hour later it was gone:
![]() |
|
To even talk to Jetstar's web site, I needed to register an email address and password, the latter something like “Never More!. It accepted that, but fortunately I displayed it before sending it off: it had removed the space!
OK, it looks like Qantas has succeeded: they've prevented me from using my frequent flyer points. How about a web search for normal flights?
![]() |
|
The interesting thing there is that somehow Google managed to find my flight destinations and dates, something that Qantas couldn't remember. Where did they get them from?
Friday, 9 August 2019 | Dereel | |
Top of page | ||
previous day | ||
next day | ||
last day |
Qantas: complaint!
|
Topic: general, technology, opinion | Link here |
OK, it's clear that the service that I have received from Qantas is unacceptable. Should I try calling them again? That can take the best part of a day, not to mention the annoyance. So called Consumer Affairs Victoria on 1300 55 81 81 and spoke to Simon, who explained that there's a special group addressing this kind of problem, the Airline Customer Advocate, and that I should talk to them. He gave me the number, 1800 813 129, but that didn't help much. First I needed to fill out a (very bureaucratic) form, and one of the questions was “have you sent a written complaint to the airline?”. No, so of course it said “do that first!”, but was too polite to tell me how.
Google was more forthcoming: https://www.qantas.com/au/en/support/contact-us/customer-care-feedback-form.html. OK, filled that out, with the obligatory one line per paragraph:
I have been trying for 2 weeks to book a rewards flight. My experience suggests that you are doing everything to stop me from doing so. Your web site makes me select flights, and then tells me "Ha ha, only joking, go to Jetstar and start again with different terms, conditions and pricing". When I proceed to JetStar I get one of three different web site crashes. Calling your customer help line 131131 resulted in up to 3½ hour delays, after which I was told that flights on the web site were not available, though I was able to confirm during the discussion that they still were. I asked to be connected to a supervisor, but after 15 minutes the line went dead.
This web site is no exception. After filling in the entire form, I receive a message that you don't like my browser, and I first need to perform a software update. I find that offensive.
Is this the way you want to treat your frequent flyers? How do you treat normal people?
But of course that wasn't going to help much, and I didn't want even more annoyance. How about just buying a flight? That proved to be more expensive than I had expected, round $300. Sure, we can afford that, but dammit, I've been collecting these Qantas points for decades now, and they keep devaluing them. Isn't it time to find a way to use them?
I couldn't think of one, so I put it aside for some other time.
NBN: some uptime possible
|
Topic: technology, opinion | Link here |
I've been grumbling more and more about the National Broadband Network's continual “scheduled outages”. How can they get away with them? Last week I noted another 48 hours for this month.
But that, it seems, is only the start. Today I received two more scheduled outage notices:
That's 120 hours outage in three weeks! Considering that they're doing it during working hours, that's effectively taking the NBN offline for some people for 3 weeks!
Yes, I know it won't be quite like that. But when are they finally going to stop this nonsense? Only a monopoly can afford that kind of luxury; otherwise they would lose all their customers. I wonder how things will be if 5G ever makes it to Dereel.
More freezer considerations
|
Topic: food and drink, opinion | Link here |
Why is freezer number 2 not working correctly? Why, is freezer number 2 not working correctly? There seem to have been two issues: one was condensation on the items at the very top, which might have been due to blocking the fan at the back. But after removing that, there was still moisture is condensing on the front of the baskets. Where is it coming from? The seal seems perfectly intact, so any moisture must already be inside the freezer.
One other question is obvious: what's the temperature in there? It's difficult to measure the temperature in a freezer, since it changes drastically as soon as you open it. Today I grabbed a remote meat thermometer (with cable) and tried that in a closed freezer. No go: it didn't display below 0°, which is reasonable enough.
But wait! There's more! Well, more thermometers, of a different kind. Tried one of them, and sure enough, it worked, showing a median temperature of about -22° in number 3 freezer (the new one that I bought a year ago). Is that correct? It may be reading a little low, but clearly it's in the right range. OK, freezer number 1 (20 years old?). Also in that range, cycling through about 5° (-19° to -24°). And freezer 2, the problem one? The same again, observed over several hours.
OK, that's in a basket. What about between door and basket? For the rest of the evening, I saw pretty much the same temperature, as you'd imagine in a properly functioning freezer with a closed door. And no moisture. Tomorrow I can continue observing.
Power fail
|
Topic: general | Link here |
Not one power failure today, but three, between 2:19 and 15:33. Still, that's 14 failures since installing the solar electricity system 4 months ago
I didn't discover this outage, like a number of others, until 13 August.
Saturday, 10 August 2019 | Dereel | Images for 10 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Qantas: success!
|
Topic: general, technology, opinion | Link here |
Somehow I couldn't accept the idea of giving up on Qantas and just buying a ticket. Somehow I need to work around the myriads of bugs.
One obvious thing was that I was trying to book flights with Jetstar only. Sure, they offer them, but with different conditions. Why? What if you need at least one Qantas flight in the itinerary? That had been my original intention—that way Yvonne could fly business class—but I couldn't find one at an appropriate time.
But how about a connecting flight? Maybe that would work. Not ideal, but at least we could get the ticket. Off to check on the Qantas site for the umpteenth time, and to my surprise found a direct return flight from Coolangatta to Melbourne at exact time we were looking for. Was that there before? It's hard to believe, and based on their web site breakage it could have been hidden where I wouldn't expect it.
OK, book to Coolangatta on the (Jetstar) JQ436, the one I had been trying to get all the time, and which Qantas' Elly told me on Thursday was no longer available. And the conditions were as stated on the Qantas site, not as stated on the Jetstar site. And then QF881 on the way back, this time business class. All went well, and I was able to book the flight with no difficulty:
![]() |
|
Finally! It's taken 32 days!. I'm so relieved that I don't feel relieved.
What went wrong here?
So what's really going on? I'd say that there's a good case of Hanlon's razor here: their web site is terminally broken, in particular communication with their subsidiary, Jetstar. Their frequent flyer phone support is some of the worst I have ever seen, though it's not clear how I got through quickly enough on one occasion. And their system is so opaque that even their consultants can't navigate it. At the very least they need better training for their consultants.
I wonder if I'll at least get an apology based on my complaint.
Analemma experiments
|
Topic: photography, opinion | Link here |
My experiments with analemma photos have not been very successful so far. In particular, the sun's disk is spoilt by flare:
![]() |
|
Probably I need still much less exposure. Tried today with the E-30 and the Zuiko Digital ED 9-18 mm f/4.0-5.6 fitted with an infrared filter. Success, of a kind:
![]() |
|
![]() |
|
That's f/8 at 1/8000 s, EV 19. I've established that the filter corresponds to about another 10 EV, so we're looking at about EV 29. But I tried bracketing, and took another shot at 1/1000 s (EV 16). Nothing to be seen, despite 3 EV more exposure! A thin cloud in front of the sun. I wouldn't have expected it to make that much difference.
What next? How do I align photos like this one? Nothing else is visible.
Art for sale
|
Topic: general | Link here |
Yvonne has agreed to exhibit some of her paintings at the Dereel Hall for the next month or so. Over with her to help transport them, leaving others to hang them in the hallway:
![]() |
|
After a bit of playing around, ended up with 6 horse-related pictures in the hallway and another 3 dog-related ones, including the prototypical vicious hunting dog, in a staircase:
|
![]() |
|
![]() |
|
She's allowed to put up pricing and other info, but I don't see anything selling. Apart from the fact that the typical client is not a Dereel resident, the place is hardly ever open.
Air-fried salmon
|
Topic: food and drink, opinion | Link here |
Salmon steaks for dinner tonight, about 4 cm thick. Yvonne suggested doing them in the air fryer. OK, the small (“digital”) one will do that. What temperature? The instruction manual recommended between 10 and 23 minutes at 180° for steaks, which seems excessive. In the end I gave them 8 minutes at 180°, which seems about right, leaving them slightly raw in the middle.
Sunday, 11 August 2019 | Dereel | Images for 11 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Qantas bugs again
|
Topic: general, technology, opinion | Link here |
My issues with Qantas have been worked around, but today when I looked at a tab I had opened yesterday, I saw:
![]() |
|
What can I say? That seems to be normal.
Tight panoramas
|
Topic: photography, technology, opinion | Link here |
Yvonne's paintings are hanging in a hallway maybe 1.5 m wide:
|
How do you take a photo like that? That one is the result of stitching four photos together with Hugin, but I'm not very happy with it. It starts with the individual views:
![]() |
|
![]() |
|
![]() |
|
Part of the issue is doubtless that I didn't take the photos from exactly the same position. But the real problem is representing each painting correctly without distortion. Clearly I failed.
There are more issues than I expected:
Next time with a fisheye lens?
Rain, rain, rain...
|
Topic: general | Link here |
It's been very wet recently. In the last 4 days we have had nearly 50 mm of rain. Apart from the sodden paddocks (one of the reasons we first considered leaving Germany 25 years ago), there's the issue with fallen trees, here in Harrisons Road:
![]() |
|
![]() |
|
That's very close to the mattress that got dumped or lost along that way a few weeks back, here visible on the side of the road in the first image:
![]() |
|
Monday, 12 August 2019 | Dereel | Images for 12 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
More freezer insights
|
Topic: general, food and drink, opinion | Link here |
I've been monitoring the temperature between the baskets and the door of freezer 2 (the one that gave me concern last week), and the results are interesting. It maintains a displayed -21° or so most of the time, but when I open it the temperature rises very quickly. Even a couple of seconds are enough to raise it to -9°, and any significant opening time can raise it to +2° or so. But the fronts of the baskets no longer ice up, so I've gradually been moving the baskets back from freezer 1 to freezer 2.
Surprise! Now I'm getting the icing again! My best bet is that that's simply because I open it so frequently (something that I need to do). That's only the case with this freezer, so that would be enough explanation. Clearly it's a good idea to open it as seldom and as quickly as possible.
Qantas: that's a complaint resolution?
|
Topic: technology, general, opinion | Link here |
Email from Qantas today, titled “Email History”, and with the subject “Qantas Loyalty - SR2564610” regarding Friday's complaint. Resolved? No. This “reply” isn't worthy of the name. I get the feeling that the respondent didn't even read the complaint.
Some of that could be the format of my message. I wasn't allowed to enter real text, so I had to enter it as one-line-per-paragraph text:
But that wasn't illegible enough for Qantas. By the time its system had processed it, we had:
And the response? Boilerplate, in a nutshell saying “sorry your preferred flight wasn't available”. IDIOTS! What I complained about was:
How many of those points were answered? None of them. Instead an incorrect claim that the flights were no longer available (I ended up booking one of them a few days later).
So why this nonsense? Somehow you could really get the impression that they're trying to annoy people, but I think this is yet another case of Hanlon's razor.
Paintings: fisheye attempts
|
Topic: photography, opinion | Link here |
Yesterday I tried to stitch a panorama of Yvonne's paintings at the Dereel Hall, without spectacular success:
|
I thought that it might be better to take photos with a fisheye lens, which would cover the width in a single photos. Yvonne went over there, and took a few photos for me. No, that's not the solution:
![]() |
|
![]() |
|
The second is DxO PhotoLab's reformatting of the image. Yes, I could crop it and maybe modify it a little, but not much at all. For the time being it's the one that got away.
Tuesday, 13 August 2019 | Dereel | Images for 13 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Updating solar power monitoring
|
Topic: Stones Road house, general | Link here |
When the solar electricity system was installed I spent a lot of time investigating the information that it provided, but of course that gradually became less interesting. I'm still collecting ridiculous quantities of data:
But I'm not doing much about evaluating it, and I'm not saving some other, more succinct information. Today I did something about it: I still need to find a way to save JSON in a database, but at least I can save it as text, and also evaluate any issues with the inverter. That gave me a number of power failures, none of them long,
Understanding Android, next example
|
Topic: technology, general, opinion, food and drink | Link here |
I'm off to Geelong next week to see Leela, the periodontist. Clearly time to call Jason Yap of the Gourmet Asian Grocery and order some dofu puffs, of which he normally doesn't have enough.
What kind? I forget. Never mind, he sent me a message (what kind?):
![]() |
|
Found a way to answer, but clearly that was a good use of the facilities available. I should learn how to use them.
But how do they fit into frameworks? Standards? He only had my phone number, so presumably this is an extended SMS (MMS?). So there's immediately a down side: how do I save it anywhere? I'm sure that there's an app for it, but basically it runs in parallel with email, and there's no obvious reason why it should.
And then there's another interesting detail: it's clearly identified as coming from “Gourmet Asian Grocery”. How does it get that information?
Wednesday, 14 August 2019 | Dereel | Images for 14 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Dereel Bushland Reserve again
|
Topic: general, animals, gardening | Link here |
We used to walk the dogs to the „Große Linde“ (big Linden tree, in reality a conifer) before we decided to walk further. Then a few weeks ago I went further, down to the creek, before the track deteriorated and I turned back. Today we had the first indications of spring with the flowering wattles:
![]() |
|
So we decided to try to get further: after all, the track was heading back to Bliss Road before petering out.
No luck:
|
![]() |
|
That's looking roughly north from the south-west end of this walk:
![]() |
|
A pity, in a way. Maybe I should put some boots on (a rare thing indeed) and we should rough it.
Rejoicing in a bone
|
Topic: animals | Link here |
While walking, Leonid found a bone (kangaroo skull again, maybe?). He really enjoys playing with the things:
![]() |
|
![]() |
|
![]() |
|
I think it probably looks better with video, like last month.
Eliminating all information from labels
|
Topic: food and drink, general, opinion | Link here |
Yvonne bought some chicken skewers again today. It took me a while to find them in the fridge:
![]() |
|
At first I thought it said “Lamb”, but it's a compressed almost consonantal representation of “Lamb and Garlic”. And what? RSPCA Approved? Maybe that means that it's vegetarian. More importantly, how much does it weigh? What price per kilogram? Once those were required by law; why have they removed them? Yvonne thought that maybe it was a per-piece price, but even that would need to be stated. And I can't see how 6 skewers can cost $4.14.
Thursday, 15 August 2019 | Dereel | Images for 15 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
More walking tracks
|
Topic: general, animals, gardening, opinion | Link here |
One of the issues we have round Stones Road is that there are few places to go walking without turning back half way. Yesterday we were thwarted in the Dereel Bushland Reserve, but what about to the North in Enfield State Park? At the beginning of last month I walked down Spearys Road as far as practical, but it occurred to me later that there are two places which almost meet (run the cursor over an image to compare it with its neighbour):
![]() |
|
![]() |
|
There's quite a dip visible from the south, and I'm not sure we'll get up the other side, so we'll try again from the north.
On the way back today I took another look at the plant that I had identified last month:
![]() |
|
![]() |
|
I had thought that the beige spheres were buds—the buds of Paulownia kawakamii look similar—but it seems that they're something like berries:
![]() |
|
![]() |
|
Also noticed Lorraine Carranza's pretty Leucadendron in flower. She gave us one that we now have by the entrance of the house, but it isn't flowering yet:
![]() |
|
Friday, 16 August 2019 | Dereel | |
Top of page | ||
previous day | ||
next day | ||
last day |
More TV programme sources
|
Topic: multimedia, general, opinion | Link here |
Over the last two years or so we've been downloading TV programmes mainly from ARD and ZDF, the German free-to-air broadcasters. That's all perfectly legal, but there's only a certain amount of stuff available. There are other countries too, apart from Germany. In Australia we have, in particular, ABC, the national broadcaster, and SBS, the “Special Broadcasting Service”, which is intended "to provide multilingual and multicultural radio and television services that inform, educate and entertain all Australians and, in doing so, reflect Australia's multicultural society". As I see it, they're only moderately successful, but they do have the occasional film that isn't too strange.
I get frequent newsletters from SBS advertising programmes that I can download, at 720p resolution but low quality. And the content is also strange; the concept reminds me of what people in the UK thought of “French films” 50 years ago. Still, there are occasionally things worth watching.
And ABC? They have this thing called iView, which never seems to work for me. How about downloading things? No, you can't do that; well, at least the ABC didn't plan for it. Spent some time today looking at how to do it, and came up with this description, requiring me to install special software on a Microsoft box to download it. I was able to confirm that YouTube Downloader can't do anything with them:
=== grog@teevee (/dev/pts/4) /spool/Series 4 -> yt https://iview.abc.net.au/show/dirk-gently-s-holistic-detective-agency
Why is this so difficult? And it seems that the ABC is also still in the 20th century, with resolutions like 716x404. Is it worth the pain? They offered a newsletter, presumably like the one that SBS sends me, but pressing on the “Sign up” (sorry, “SIGN UP”) button didn't do anything obvious.
I should really look in other countries. In the UK they have some reasonable content, but it's geographically limited. What I've seen of French offerings doesn't excite me. And somehow I can't find anything worth watching in the USA; it's as if they're on a different planet, with all the shows either violent or fantasy or both.
Saturday, 17 August 2019 | Dereel | Images for 17 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Power fail!
|
Topic: general, technology, opinion | Link here |
Looking through my daily log files this morning, I saw:
Huh? Those are boot messages. What are they doing here?
=== grog@eureka (/dev/pts/31) ~ 1 -> date; ruptime
Two machines rebooted at 0:35! Why? The obvious reason would be a prolonged power failure that drained the UPS that they're on. But there was no power outage. And the photovoltaic system showed no issues. The most obvious thing was a drop in grid voltage to “only” 241 V at 0:27, but at that time lagoon was running and logged an otherwise uninteresting event. And 241 V is still well over the nominal 230 V here.
That looks like this horrible Eaton UPS doing its own thing again. It saved me once while we were working on the system a few months ago, but just failing like that is pretty much the opposite of what it's there for. Maybe I should remove it after all.
More ABC investigation
|
Topic: multimedia, technology, opinion | Link here |
Is ABC iView worth the trouble? In the past I never thought so, but I have a way to download the programmes. So why don't I look at what I can find? Installed allavsoft on dischord, my Microsoft box, and tried downloading.
They want money! Yes, I can download 5 programmes for free, but that's it. And of course, like all Microsoft programs, I can't work out where it has put it. In a “folder” called Download. But it wasn't the Download “folder” that the GUI chose to show me. Why can't Microsoft finally adopt complete path names? Finally I found it, as suspected low resolution:
=== grog@teevee (/dev/pts/7) /spool/Series/Dirk-Gently 32 -> l
=== grog@teevee (/dev/pts/7) /spool/Series/Dirk-Gently 33 -> mpid Dirk-Gently-s-Holistic-Detective-Agency---Series-1-Ep-1-Horizons.mp4
Is it any good? I haven't looked at it yet. But while messing around, found this in the Wikipedia page:
In 2012 the ABC sent a legal notice to the author of an open source program called Python-iView which enabled users to download videos from the ABC.
OK, ABC, I get the message. Low res content where others offer higher res. And you want to tell me how I can watch it. Goodbye.
About the only thing that I did get to work was the newsletter, on the third attempt. At least that way I'll know what I'm missing.
Towards better analemma photos
|
Topic: photography, technology, opinion | Link here |
I still haven't worked out a good way to take my analemma photos, but I should at least experiment. Set up a tripod and head to point (hopefully) to the full range of the analemma, and took a number of photos. First, one with the infrared filter, 1/1000 s at f/8:
![]() |
|
How can I align that with anything else? I can't use control points, because the only one is the sun, and it would annul the purpose of the series to align on that. So I'll have to just hope that the camera (on a tripod) doesn't move between shots, and overlap them manually. But that, too, doesn't work well. Here's a corresponding shot, more or less correctly exposed:
![]() |
|
How do I do that? It proves that Hugin is not cut out to do this, and there's a second issue: yes, I can get them to align, but how do I remove the mess around the sun in the second image?
With difficulty. After a lot of messing around, the best I could get was this:
![]() |
|
Back to the drawing board.
In passing, it's interesting to note how exact you need to be. These two images were taken 136 seconds apart (run the cursor over an image to compare it with its neighbour):
![]() |
|
![]() |
|
Under those circumstances, my intention of taking the photo at exactly 12:25:00 didn't quite work: the second one (the “real” one) was taken 37 seconds too late.
Circular walk: thwarted
|
Topic: general, animals | Link here |
As planned on Thursday, off today to try to close this loop:
![]() |
|
![]() |
|
Up there to the fence that I found last month, noting in the process that it was less easy to cross than I had hoped. At first sight it's a flattened fence:
![]() |
|
![]() |
|
But come up close and there's a single strand of barbed wire about 60 cm off the ground:
|
Found a way across further to the north, but Yvonne didn't want to come. She decided that it must be private property. All that way for (almost) nothing: I did manage to get a view to the east:
|
On the way back, ran into Fiona Drayton and friend on a—what? I call it a trap, but Yvonne tells me it's a gig:
![]() |
|
![]() |
|
Skewered kidneys
|
Topic: food and drink | Link here |
Yvonne bought some lamb kidneys on Wednesday—high time to eat them. But how? In the past we've eaten them en casserole, though I note that I don't have a recipe for that online. But this time she wanted them on skewers, in the process forgetting that we already had a recipe. Never mind, this time we did it in the hair dryer (the larger of the two “air fryers”.
How long? After 16 minutes at 210° they looked OK, but they were somewhat underdone in the middle. Next time I'll give them 20 minutes.
Sunday, 18 August 2019 | Dereel | Images for 18 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
NBN slower?
|
Topic: technology, opinion | Link here |
For some time I've noted an interesting detail in my National Broadband Network monitoring data:
Some time round 11 July the link latency (blue trace) increased by 3 ms. Why? Are they going to do something about it in one of their never-ending “planned maintenances”?
Bubbles?
|
Topic: general | Link here |
Walking the dogs through very wet weather, found this:
![]() |
|
![]() |
|
A surprising number of bubbles were rising from a puddle in the road. Why? How? The puddle must have been there for hours, and the road is generally wet enough to have no air pockets, in fact wet enough for me to wear a hat and inspire Yvonne to take a rare photo of me with the dogs:
![]() |
|
Monday, 19 August 2019 | Dereel → Geelong → Dereel | Images for 19 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Another bloody power failure!
|
Topic: general, technology, opinion | Link here |
Woke up in the middle of the night at... when? It was dark, and so was the display on my bedside clock. Damn! Had we had the dreaded nightly power failure coupled with the air conditioner draining the remaining battery power?
Out to take a look at the damage. No, all was running, and the kitchen devices proclaimed 4:55. Only the UPS circuits were down, including all computers. RCD? No, it was all OK.
Damn! It must be the UPS itself. I had an issue with it only 2 days ago. But it's outside in the shed, and it's dark.
Back to bed and thought over the options. The obvious thing to do is to remove the UPS from the circuit; since the installation of the photovoltaic system four months ago it's no longer needed. But how do I do that? From memory, one of the connections was hard-wired, and the other had a 15 A plug, not standard. Which is which? Clearly the 15 A plug would be on the input. All I need to do is to remove the connector to the UPS on the (hard-wired) output side and put the 15 A plug on it. But that would destroy the cable, which could be expensive. Do I have alternative cables? Last time I messed around with the induction cooktop I couldn't find one. Do I have time to drive into Ballarat and buy something? I have to leave for Geelong at 12:40, which might make it a bit tight.
Call in an electrician? What's the chance of getting him here today? None of the ones I know, anyway. Get by without the UPS circuits for a while? All the computers were on one, but eureka and teevee have non-UPS circuits available, and I could lay an extension cable for lagoon. But then there's the house lighting, all on UPS. We could work around that, too, but it wouldn't be fun.
But what's wrong with the UPS in the first place? Maybe it's trivial to “fix”. Round 6:10 got up and marginally dressed and out, still in the dark, to the shed. OW!
![]() |
|
![]() |
|
What happened there? The way to the shed goes through the laundry, behind this door:
![]() |
|
![]() |
|
And I had walked into one of the rubbish bins, which (from in front) has a convenient pedal for opening it. This morning I proved that it was not so convenient from the side.
Out to the shed before discovering how badly I was bleeding. The UPS showed normal operation! I think so, anyway. It's not easy to see what it's thinking:
![]() |
|
![]() |
|
To even read the display, you need to kneel and press the ESC button:
![]() |
|
![]() |
|
Contact issues, perhaps? Toggled the switches, unplugged and plugged the cables. Nothing. Power cycle? How do you power cycle it? Clearly the IO button at bottom right, but just a press? No. Long press? No. If you're kneeling on the floor looking at the display, it's clear: press, release, press again. And then it doesn't turn off; maybe it goes onto passthrough, which would really be what I want. If it happens again, I'll try that. But I turned it on again and noted with relief that it showed that it was supplying about 400 W to something. Back into the house. Yes, up and running.
Next, reboot eureka, which is still horribly down-rev. And for some reason the boot loader stops saying “can't find /kernel”. As I discovered last month, the solution is to ignore it and type boot. And that worked this time too. High time to upgrade the system.
That wasn't the end of it. Later, checking my eternal National Broadband Network problems, I discovered that my graphs weren't being updated. Further investigation showed that one of the scripts was failing with the message
awk: trying to access out of range field -1
input record number 1493, file
source line number 1
Isn't that helpful? It took a while to discover that one of my log files had a spurious line of binary zeroes, apparently written when the system went down:
On the positive side, that gave me a good idea of when the power went down on eureka. On lagoon it was 02:34:37, which implies that the office UPS only lasted for 10 minutes, less than I would have expected.
Copying music to SD card
|
Topic: multimedia, technology, opinion | Link here |
How do I copy music files to an SD card? In principle it's simple: Mtools are your friend. But there's some issue with the sequence: the files are stored on a FAT file system, but the player (mine, at any rate) is too stupid to read file names, let alone sort by name, so it plays them in the sequence in which they're stored in the directory, effectively random. In the past I wrote a script to do something like that, but it wasn't exactly what I expected. OK, copy one for one and see what happens.
That probably worked, but after a few directories I got a message that I have never seen before:
=== root@eureka (/dev/pts/7) /src/Music/MP3/Bach-JS/Magnificat 48 -> for i in *; do mcopy $i d:; done
What's that? There were 74 files in the directory. Is that all that FAT can handle?
No, of course not, as didn't occur to me until later. On cameras they routinely store hundreds, even thousands of files in a directory. A limitation of mtools maybe?
I didn't get a chance to try out the new card. Just before leaving for Geelong, Yvonne noticed that my front tyres were flat. Well, at any rate seriously underinflated. No time to get out the air compressor and fix things: I took her car instead, which doesn't have an MP3 player.
Periodontal checkup
|
Topic: health | Link here |
Despite my somewhat belated departure, arrived in Geelong with a good 15 minutes to spare. They made up for that by being 20 minutes late, something that almost never happens. And the periodontal checkup was uninteresting—things look as good as they ever have done.
Shopping in Geelong
|
Topic: food and drink, opinion | Link here |
After the periodontist, off to Belmont looking for foodstuffs. I regularly go to the Indo-Asian Grocery Store and Gourmet Asian Grocery, but recently Google has come up with a couple more: the “Best Indian Grocery Store Geelong” and the “Geelong Belmont Asian Groceries Sto” (tastefully truncated), both without any useful URL, but at least there was an indication on the map: both on the other side of High Street, but within a few hundred metres of the first two.
OK, first to Best Asian:
![]() |
|
I really only wanted that typically Indian food, Masa harina. No, they didn't have it. Other maize flour? No, no maize flour. Took a look around, found some Makki Atta, the same brand as this stuff that we bought last year:
![]() |
|
But I didn't need any of that: it's not much good, and anyway I have some.
In fact, I don't. We gave it to the dogs.
Off to Indo-Asian, where thankfully they had plenty of Minsa masa harina. I keep running out, so this time I bought 4 kg, which should keep me going. The shopkeeper tells me that only Mexican and South American people buy it, specifically for tortillas, and also that Maseca (which I would have preferred) is currently not available, and that he keeps trying to get it.
Then to the Gourmet Asian Grocery, a very distinctly Malaysian place:
![]() |
|
There were a couple of older Chinese people talking to Jason Tan, the owner, in an English that reminded me of my childhood. The Malay suffix “-lah” (an exclamation mark) clearly still lives on in Malaysian English.
I had ordered some dofu cubes, and Jason had put them aside at the back of the fridge, but it seems that somebody had plundered them, and I only got 4 rather than the 5 that I had ordered. Also bought a large amount of other stuff.
Finally to “Geelong Belmont Asian Groceries Sto”, only marginally recognizable by that name:
![]() |
|
It also appeared to be shut:
![]() |
|
And there was no sign of an Internet cafe (isn't that a little anachronistic nowadays?).
This one was interesting. Gourmet Asian Grocery is Malaysian, but the people in this shop all spoke Mandarin Chinese to each other, something that I've seldom heard in Australia. I'm also not sure how well the shopkeeper speaks English; the only things she said was the price. Didn't buy much there, but she did have some noodles and prawns.
Tuesday, 20 August 2019 | Dereel | Images for 20 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Mee soup again
|
Topic: food and drink, opinion | Link here |
After yesterday's purchases, it was clear that I should have some East Asian food for breakfast, preferably something I hadn't had before. Tried this mi udang from Teans Gourmet:
![]() |
|
The results? OK, I suppose:
![]() |
|
But then I looked through my diary. I've had this before, and I wasn't as happy last time:
![]() |
|
In fact, I'm not even sure that what I ate today wasn't bought some time ago.
Wildflowers?
|
Topic: gardening, opinion | Link here |
When walking the dogs, I find various plants on the wayside that might fit the category of “weed”. But what are they? Are they only local? This one here is borderline: it's interesting enough to classify as something interesting, but it spreads easily.
![]() |
|
![]() |
|
![]() |
|
It seems that the white flowers are mature pink flowers. I must find out what it is.
How many web sites?
|
Topic: technology, general, opinion | Link here |
An interesting statistic from Statista today: How many web sites are there?
It seems that there are currently round 1,710 million A records for web sites out there, up from round 250,000 when I first went on line. But the real thing of interest is the language they use!
On 6 August 1991, British physicist Tim Berners-Lee at CERN in Switzerland published the first ever website, the WorldWideWeb (W3). By the end of 1992 there were ten websites online and, after CERN made the W3 technology publicly available on a royalty-free basis in 1993, the internet gradually started to grow into the all-encompassing giant that it is today.
So the WorldWideWeb [sic] was simply the CERN web site? The things you learn! And the rest are the “internet” (note the lower case, clearly written by somebody who doesn't know the difference between “internet” and “Internet”).
How times change.
Wednesday, 21 August 2019 | Dereel | Images for 21 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Australia Post: So nice, so nice, we do it twice
|
Topic: general, technology, photography, opinion | Link here |
Last week I bought a flash unit on eBay, and nowadays Australia Post supplies emails with something like tracking information, and eBay does its best to second-guess. It arrived at “Napoleon” (Australia Post's name for Napoleons) on Monday. Today Yvonne picked it up on the way back from shopping. The emails read:
I particularly like the time zones. I can understand eBay using a time zone UTC-7, but why on Earth does Australia Post use UTC-6 (presumably North American Mountain Time), and 16 hours behind local time?
Free Software workshop in Ballarat
|
Topic: technology, opinion | Link here |
Mail from Ben Sturm today, somebody whom I don't know, but who seems to have been active in Ballarat for 15 years. He's running a workshop next week with the title “Contribute to Free and Open Source Software Workshop”, and was hoping that I could find participants. I can't, but it sounds like a good idea. It seems that it's part of a government-sponsored Digital Information Festival which will start in a couple of days' time and run for 2 weeks. I wonder how that will pan out.
Garden flowers in late winter
|
Topic: gardening, opinion | Link here |
It's late winter, a month before the equinox, and I've decided to change my monthly photos to match equinoxes and solstices. Gradually spring seems to be coming. This month has been particularly wet, nearly 80 mm in the past 31 days, and some of the plants seem to be suffering from it, like maybe this Epazote that I planted only last week:
![]() |
|
At the top of the list of other sick-looking plants is most definitely this Corymbia ficifolia that we bought only two months ago. Here on planting and now:
![]() |
|
![]() |
|
What went wrong there? Is it the plant, the planting, or the planting location? Certainly nothing seems to grow right there.
The Salvia microphylla that we bought at the same time also doesn't look happy:
![]() |
|
But its neighbour also looked like that a year ago, so I haven't given up hope on that one.
And then there's the Agonis flexuosa that we bought as the same time. Here last month and today:
![]() |
|
![]() |
|
Which of those look better? We'll see how it does, but I'm not overly concerned.
The Alyogyne huegelii on the north side of the house is doing better now than it ever did in the summer:
![]() |
|
![]() |
|
That's not a very normal time for a hibiscus-like flower. I wonder if it's just the freedom it experienced after the tomatoes are gone.
The Camellia japonica in front of the house is looking better, even if the leaves give cause for some concern:
![]() |
|
![]() |
|
The island in the driveway is now almost completely covered in Carpobrotus, to the extent that we have had to cut it back:
|
The Leucadendron could look happier:
![]() |
|
And though the Paulownia kawakamii looks like a dead twig, it at least has some flower buds:
![]() |
|
![]() |
|
The succulent bed continues to improve, now with a number of flowers:
|
![]() |
|
![]() |
|
![]() |
|
To my surprise, the Petunias that I left outside over the winter haven't all died:
![]() |
|
![]() |
|
And once again, the Hibiscus rosa-sinensis in the lounge room is flowering happily, just like it did this time last year:
![]() |
|
I had thought that they would be happiest in mid-summer, but the clone outside is also looking like it will recover as soon as it gets warmer:
![]() |
|
Little garden work
|
Topic: gardening | Link here |
More rose pruning. Why is it so difficult? Spent about 20 minutes and then gave up. I suppose part of it is just deciding where to cut.
Understanding remote flash
|
Topic: photography, opinion | Link here |
Last week I bought Yet Another macro flash unit, a mecablitz 15 MS-1 digital .
Why? It's the fourth macro lighting device I have, but the others all have their disadvantages:
So when I saw a mecablitz 15 MS-1 on sale on eBay, it seemed reasonable to put in a bid. And how about that, I got it, brand new, for $104. Google knows places that sell it in the same condition for between $600 and $709.
It's not as if the mecablitz doesn't have its own issues. The biggest ones are that it's relatively heavy, and that it's a slave flash: you need a master flash as well. Sure, I have flashes—at least four that would come in question for the master function, probably one of the toy ones that Olympus delivers with its cameras. But I need to understand how to use them.
OK, put in batteries, turn on. There's a flash test button, something notably missing from the STF-8. It has a display and three buttons behind it. Initially the display showed something about modelling lights, not the most obvious thing I would expect. OK, leave modelling light off, press OK (middle button), and get more selections with a wandering OK, now the right-hand button—something that I know from other mecablitzen—and end up with a display with the letters CAN at top left and a light balance display that I can change with the left and right buttons. What does CAN mean? Short for channel? How do I get out? I would expect the middle button to do that, but it was dead. Broken? I already have that issues with the Viltrox unit.
Nothing for it: RTFM. Lots of images of displays, but none with CAN at top left.
More details. Somehow this Metz documentation is hard to read; I've seen it with the documentation for the 58 AF-2. But gradually it dawned on me: it's the emulation, one of (the instructions say) CAN REMOTE, NIK REMOTE, OLY REMOTE, PEN REMOTE, SAM REMOTE and SON REMOTE. No display that I could find showed REMOTE, but clearly the bold text is a tasteful abbreviation of the emulation mode. The instructions note that the most flexible modes are CAN REMOTE, NIK REMOTE and CAN REMOTE, OLY REMOTE, and interestingly most of the examples show OLY (without REMOTE).
OK, how do I control the thing? With the on-camera flash, of course, along with the thoughtfully supplied infrared clamp, which, they say, is intended to block visible light. I need to look at it more carefully, but so far it seems to be designed to give the visible light a chance to shine through the hinge. But then I read:
The slave flash unit is remotely controlled by the master or controller flash unit.
A master flash unit contributes to the lighting and at the same time controls the slave flash units.
A controller flash unit only has control functions.
OK, I'll bite. How do I choose one or the other. Ah, see operating manual of the camera or external flash unit.
OK, time to look at the camera manual, which shows that Oly is just as confused as mecablitz and I. The chapter on flash (page 57 to 60 in the OM-D E-M1 Mark 2 Version 3.0 manual (PDF)) doesn't mention remote flash. Ah, the advantages of search functions in PDF documents. It's described all over again on page 153, apparently written by another group of people. It also seems that a different group of people wrote the firmware. Basically, what you do is:
In Camera (“Shooting”) Menu 2, select Flash RC Mode. This replaces the standard “Super control panel” that controls most aspects of the settings, and which this documentation calls the “LV super control panel”, with a flash-specific display:
|
![]() |
|
How do you get back to the SCP? Press INFO to toggle. What a clear indication of poorly adapted configuration menus!
And what does it all mean? That image above is the only documentation. I had a bit of an idea, but surely there must be some tutorials available on line? Went off looking for olympus remote flash tutorial and found several, including a number that didn't understand the details. I haven't watched them all yet, but what I see here is, for Olympus and the mecablitz 15 MS-1:
And that's as far as I got today.
In passing, Olympus' flaky documentation doesn't end there. On page 152 of the manual I read:
![]() |
|
This table gives a guide number for ISO 100. But the camera has a base ISO setting of 200, and 100 is very much an exception. In addition, the focal lengths are given in 35 mm film camera equivalents. Why? This is a manual for a Micro Four Thirds system camera. So to understand this table, you first need to divide the focal lengths by 2 and multiply the guide numbers by 1.4.
Surely they can do better than that.
Thursday, 22 August 2019 | Dereel | Images for 22 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
FAT file directory size
|
Topic: technology | Link here |
Mail from Harold Gutch today, with a reference to Monday's article about SD file limits, and pointing me at Design of the FAT file system. It seems that the root directory is handled differently:
This is a Directory Table that stores information about the files and directories located in the root directory. It is only used with FAT12 and FAT16, and imposes on the root directory a fixed maximum size which is pre-allocated at creation of this volume. FAT32 stores the root directory in the Data Region, along with files and other directories, allowing it to grow without such a constraint.
That makes sense, but further reading at File Allocation Table states:
The number of root directory entries available for FAT12 and FAT16 is determined when the volume is formatted, and is stored in a 16-bit field. For a given number RDE and sector size SS, the number RDS of root directory sectors is RDS=ceil((RDE×32)/SS), and RDE is normally chosen to fill these sectors, i.e., RDE*32=RDS*SS. FAT12 and FAT16 media typically use 512 root directory entries on non-floppy media. Some third-party tools, like mkdosfs, allow the user to set this parameter.
OK, nothing for it. Is it even FAT-16? These limitations don't apply to FAT-32, and the card is (just) small enough for FAT-16. And who formatted it? Time to take a look at the card—mañana.
Weather station fail
|
Topic: technology, general | Link here |
Into the office this more to find lots of log messages, repeating about every 5 seconds:
wh1080 is the program that controls my weather station and saves the results in a database. yreport is one of the programs that processes the saved data, and it wasn't finding any. I should check why it SIGSEGVs instead of producing a usable error message, but the more immediate question was why wh1080 couldn't read the device. OK, this thing is really flaky, and I continually had to physically disconnect the USB connector. But this time it didn't work.
OK, fire up gdb, not something I do very frequently any more. Yes, no trouble opening the device. But it hung on the read. Why?
Removed the batteries and tried again. Success. I suppose that's about as far as it goes unless this starts happening more frequently.
More photovoltaic fun
|
Topic: Stones Road house, general, technology, opinion | Link here |
Last week's photovoltaic system monitoring improvements have paid off: today I got a long report of Yet Another “calibrating battery” status. This time it ran only one cycle, a little over 4 hours from 15:12:22 to 19:28:41, suggesting that there was really something wrong last month. But once again it discharged the battery completely, and presumably there are also alarms from the battery. From 17:31:18 to 18:05:24 the state of charge was under 5%, and from 17:40:49 to 17:55:03 it was at 0%.
Time for some answers. Sent a message to Fred and asked for a statement from the makers of the battery and the inverter. Not one, but two replies by the evening, saying that he was also getting the two to talk to each other. I wonder what will happen.
Trump: not pro-semitic
|
Topic: politics, opinion | Link here |
One of the the many obnoxious things about Donald Trump is his racism. In particular his hatred of Muslims and other (non-US) Americans is clear. But in one country he's a hero: Israel. He has turned a blind eye to their territorial violations, recognized Jerusalem as the capital of Israel, recognized the Golan Heights as part of Israel, not only turned a blind eye to the plight of the Palestinians, but also cut aid to them. No wonder the Israelis love him.
Ha ha, only joking. He discovered that most US Jews vote Democrat, so he blasted them.
What a man! Who can accuse him of being preferential? He hates everybody equally.
White bread rolls
|
Topic: food and drink | Link here |
We're out of hamburger buns (bread rolls). OK, no worries, bake some more. But we were out of one of the ingredients, “Manhattan Light Rye” bread mix, so I had to do it with only wheat flour. That required more water, 635 ml instead of 580 ml.
The result? OK, but not as good as the original recipe.
Friday, 23 August 2019 | Dereel | Images for 23 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Another power failure
|
Topic: general | Link here |
Another advantage of my improved photovoltaic system monitoring is that I get timely information on power (grid) failures. Another one last night at 18:20:43 for 4 seconds.
Spring on its way
|
Topic: general, animals | Link here |
Gradually the long, wet winter is coming to an end. Seen today while walking the dogs:
![]() |
|
![]() |
|
![]() |
|
Yvonne thinks that that's particularly early for ducklings. The only previous mention in my diary (October 2014) suggests that she's right.
Saturday, 24 August 2019 | Dereel | Images for 24 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Unexpected consequences of Trump's trade war
|
Topic: politics, opinion | Link here |
The Amazon is burning! Well, not the Amazon itself, clearly, but the rainforest around it.
Why? Well, it happens every year for various reasons, but there's much more this year. Part of it is a roll-back of environmental protections by the Brazilian Trump-alike president, Jair Bolsonaro. And part of it is doubtless increased media attention because of Bolsonaro. Clearly there's a real mess there, one which Bolsonaro blamed on everybody he didn't like, with no justification. Finally, after international threats, he's promising to send troops, but there are doubts about how effective it will be. That's an ecological catastrophe, though I hope I don't have to hear the term lungs of the planet too many more times.
But how did these fires start? Lax controls, people wanting to clear land. For what? Crops, clearly. And it seems that first and foremost are Soy beans, as National Geographic notes. That's nothing new: Greenpeace has an undated page, clearly from some time ago, stating that the Amazon was being “bulldozed” for soy 10 years prior. And now that Donald Trump has overpriced his country's soy beans, what better time for Brazilian farmers to plant them? And since they will doubtless be cheaper than US American soy beans, that will have a lasting effect on US growers. Bravo, Trump! Bravo, Bolsonaro!
In passing, while writing this article, I discovered Bolsonaro's middle name: Messias! What a horrible abuse!
Construction activity in Dereel
|
Topic: general, opinion | Link here |
Walked the dogs the “long round” today, Progress Road, Rozenstein (what a name!) Road and Bliss Road. There's a surprising amount of construction going on. In Progress Road, Wendy McClelland has a neighbour who was busy cutting down (most of) the trees on his property. In Rozenstein Road there's something going on, though it's not clear what. Currently it looks like this:
|
We'll presumably see change in a few months.
And in Bliss Road, a track has been cleared:
|
I wonder why people want to live there. They're surrounded with trees, which limits the view and also greatly increases the fire danger.
Saturday dinner again
|
Topic: food and drink, general | Link here |
Chris Bahlo round for dinner tonight. For over 10 years this happened every Saturday, but in the last year or so she has Got A Life (or just got bored with us), and we see her less often. Ossobuco for dinner, along with a risotto milanese, which was even more filling than normal.
Sunday, 25 August 2019 | Dereel | Images for 25 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Online grocery shopping?
|
Topic: history, technology, opinion | Link here |
Decades ago (round 6), we lived in Kuala Lumpur, and most of our grocery shopping was with Naina Mohamed in Old Market Square. They had a delivery service: we could call up, and they would deliver by van either the same day or the next, at no additional cost. They also had order forms that we could fill out for delivery the following day. We used it a lot when we were living in Syers Road (in my case, until September 1962). For some reason we (my parents) stopped, though I don't know why. Possibly the opening of the Weld Supermarket (the first supermarket I had ever seen) put an end to the old-fashioned grocery shops.
Times have changed, of course, and when I wrote my Future of the Internet article five years ago I wrote:
the few remaining shops will mainly exist to order and supply goods available on the Internet. The exceptions will be fresh goods such as food and some services where a view of the items in advance is desired, such as some clothes.
That hasn't stopped people selling food online, of course, and in some cases it's a good idea. I am now buying just about all my wine online. But groceries? Statista recently did a page on online groceries:
Only about 2% of people regularly have grocery deliveries.
I asked Yvonne. She wouldn't either. Part of the issue, I think, is that we're fussier nowadays. Are those tomatoes worth buying? Or should I go on to Woolworths and see what they have there?
In fact, what I find interesting are the items that don't directly relate. This statistic is about the USA (of course), and it seems that restaurants are doing great business: 53% of people eat at restaurants at least once a week, and a total of 86% eat out at least once a month. And here round Ballarat I can't think of one place where I'd like to eat, and I don't think I've been to a restaurant in years.
Back to 1959: to my surprise, Naina Mohamed is still active as a pharmaceutical company, and from the same address. They always had the pharmaceutical side, and I (boy chemist) bought a lot of chemicals from them. That was shophouse 1 in Old Market Square, and the groceries were in houses 3 and 5.
Planting tomatoes
|
Topic: gardening, photography, opinion | Link here |
It's been over a month since I bought some tomato seeds for the coming spring. High time to plant them. I'm not sure what made me choose this particular mix: four different “heirloom” sorts, only a few seeds of each. But that's all I need, and the price ($2 with postage) sounded right.
But how do I tell the seeds apart? They're colour coded. The slip of paper included with them told me:
Colour | Variety | |
red | Riesentraube | |
green | Oregon spring | |
blue | Giant tree | |
purple | Black cherry | |
OK, take a look... the red seeds are clearly distinguishable. And the others? Barely. The green and blue ones both had very similar colours, and I couldn't see anything purple at all.
Tried sorting them a little, then out with a camera:
![]() |
|
![]() |
|
These ones are clearly the red ones:
![]() |
|
And these? I couldn't make up my mind with the naked eye, but there seem to be two green and two blue:
![]() |
|
And these?
![]() |
|
My guess is that they're purple, not because I can see any difference, but because they're so much smaller: they would be the black cherry tomatoes.
So: not to be repeated. It took me the best part of an hour to guess what they were, and I'm still not sure. I could be in for a surprise in a few months' time.
Using the mecablitz 15 MS-1
|
Topic: photography, opinion | Link here |
The tomato photos were a good occasion to finally use my new mecablitz 15 MS-1 digital flash unit. Connected as planned on Wednesday: flash set to OLY, all channels, on the camera channel A set to TTL, and local flash set to off. Tried it out. No flash. Set the local flash to TTL. No flash. Considered setting the on-camera flash to bounce flash and did some other random setting change. Flash. Turn the on-camera flash back to OFF. Flash. My best bet is that this was yet another case of contact issues causing lack of communication between camera and flash unit. It would be really nice if the flash display on the camera viewfinder would be confirmation that they're talking to each other.
And the results? Good! Admittedly, there was some reflection in the background (an old dinner plate), but that's the fault of the component behind the viewfinder. This thing is an order of magnitude easier to use than the Olympus STF-8, even considering that I need to connect two flash units. And the exposure was correct each time.
In passing, I hadn't noticed before that the toy flashes supplied with the older cameras (OM-D E-M1 Mark I and E-PM2) don't fit the E-M1 Mark II: it doesn't have the communication connector of the older cameras. Not serious, but yet another incompatibility.
Monday, 26 August 2019 | Dereel | Images for 26 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Time for a new web server?
|
Topic: technology, general, opinion | Link here |
Two mail messages from Mike Jeays this morning:
Date: Sun, 25 Aug 2019 11:30:52 -0400
Hi, Greg. I am not getting a response from www.lemis.com today. It responds to
a ping, but that is all.
Date: Sun, 25 Aug 2019 11:37:22 -0400
Correction; it does respond, but very, very slowly.
OK, what's going on there? Took a look. top was informative:
last pid: 94753; load averages: 29.66, 28.63, 28.18 up 379+15:03:07 02:43:33
329 processes: 28 running, 228 sleeping, 73 zombie
CPU: 94.2% user, 0.0% nice, 5.8% system, 0.0% interrupt, 0.0% idle
Mem: 175M Active, 21M Inact, 271M Wired, 2564K Cache, 58M Buf, 2256K Free
Swap: 1024M Total, 442M Used, 582M Free, 43% Inuse, 1340K In, 540K Out
Look at those load averages! It's also continually swapping, but that alone didn't make much difference, since the CPU was at 100%. And not surprisingly I was able to confirm Mike's observation of very slow reaction times.
What happened? 62 http processes. But Alistair Boyanich noticed something else: 73 zombies. Where did they come from? He suspected that they might be using up memory, though my recollection (which proved to be correct) was that zombies didn't have any memory. Still, tidying them up made sense.
Some of them were over a year old! It seems to be an issue with sshd, which doesn't seem to care too much about its children. Shot them down, and of course no change.
OK, how much memory does this box have?
CPU: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz (2200.06-MHz K8-class CPU)
real memory = 532676608 (508 MB)
avail memory = 488079360 (465 MB)
That might been enough once, but now it seems that half the world wants to access my diary. I've been planning to replace the server for a long time anyway, so now might be the time. Let's set up a Vultr. But where? Some suggested Sydney, but my recollections from this time last year suggested that Los Angeles was a good choice. Off to set that up, in the process running into some strange terms like Label and Tag. What do they mean? Checked in a window. Label sounds like host name to me, and it accepted that. OK, deploy. Email:
The following has been activated:
2048 MB Server - 108.160.130.138
IPv4 Address: 108.160.130.138
OS: CentOS 7 x64
RAM: 2048 MB
Storage: 55 GB SSD
Location: Tokyo
Label: w3.lemis.com
Huh? It had reset the choice of OS and location to (surprisingly unlikely) defaults. Destroy server, start again. New email:
The following has been activated:
2048 MB Server - 66.42.97.229
IPv4 Address: 66.42.97.229
OS: FreeBSD 12 x64
RAM: 2048 MB
Storage: 55 GB SSD
Location: Los Angeles
Label: w3.lemis.com
You can access your server using a SSH client (such as Putty for Windows), or via remote console in
your control panel. The initial root password to your server can be found in your control panel and
we recommend that you change it immediately after logging in.
Interestingly, those were the only two messages I received. Nothing at all about destroying the server in Tokyo.
OK, off to the control panel to find a hidden password along with a button “copy password”. But it didn't work. Ah, we're too polite to use X conventions. It's in your clipboard.
OK, create an xclipboard and marvel at the particularly complicated password. Fire up ”console“, paste password into it. Password incorrect. Try again. Password incorrect. It proves that I can't paste into the “console”. OK, try typing it in. Twice. Still no joy.
Fire up dischord (Microsoft box) and try there. No, that doesn't work either. Some discussion on IRC with Andrew Perry, who recommended booting into single user mode and resetting the password manually. But that's cheating. Why doesn't it work? I couldn't find out.
Finally, for reasons I don't understand, I tried:
=== grog@eureka (/dev/pts/26) ~ 5 -> ssh root@66.42.97.229
FreeBSD 12.0-RELEASE-p8 GENERIC
Welcome to FreeBSD!
Amazing! (My real expletive was somewhat stronger) Normally ssh blocks root access, but here I got it—for the first time in my life—without any access control.
And why did I try it? I had the password, and I could have pasted it into the shell if needed. So what's the point of the password? Could I have logged in without a password on the “console”? Too late to find out; maybe next time. Could ssh have identified me some other way? Somewhere Vultr have some ssh key or another of mine. Again, something to try out next time.
It seems that I've had this issue before, but on that occasion I thought that it might have been my existing password (how did that work?). And on that occasion I started thinking about a web server kit too, but I didn't get round to putting it in my HOWTO directory.
OK, start moving things across, setting up a new server HOWTO as I went. And the rest went surprisingly easily, including moving nearly 12 GB of web data across the USA. Now I can gradually start to migrate, in the process catching up on my Apache configuration, which, I suspect, is in part 20 years out of date.
Tuesday, 27 August 2019 | Dereel | |
Top of page | ||
previous day | ||
next day | ||
last day |
Lens sharpness revisited
|
Topic: history, photography, opinion | Link here |
Eleven years ago I got my second Olympus “standard” lens, a Zuiko Digital ED 12-60 mm f/2.8-4.0 SWD, replacing the Zuiko Digital ED 14-42 mm f/3.5-5.6 that came with my Olympus E-510. Why? Better focus speed, mainly. I later replaced the E-510 with an E-30 for the same reason, and now that I have the combination of E-30 and 12-60 again, it was clearly necessary: by modern standards the focus speed is still not spectacular. The E-510 with the 14-42 must have been very bad.
More to the point, though, there was one reason for which I didn't change it: the sharpness. I had been completely satisfied with the sharpness of the 14-42 mm lens, and the 1 stop less light sensitivity hadn't overly worried me either.
But then a couple of days ago I saw these photos:
![]() |
|
![]() |
|
Somehow they're not sharp. Why? Focus point comes to mind, but could it be an issue with the lens (M.Zuiko Digital ED 14-150 mm f/4.0-5.6)? I had already bought one and found it defective, but I hadn't really had any issues with the second one. Am I maybe getting fussier?
In the meantime, I have quite a collection of “standard” lenses: apart from the 12-60 and the 14-150, I have a new 14-42 Micro Four Thirds system lens and two others (m.Zuiko) 14-42 mm lenses, then the Zuiko Digital ED 14-35 mm f/2.0 SWD, the Leica DG Vario-Elmarit 12-60 mm f/2.8-4 and the M.Zuiko Digital ED 12-100 mm f/4.0 IS PRO. Are there noticeable differences in their sharpness? Tried that out yesterday with most of them, and today I processed them. In sequence: 12-100, 15-150, Zuiko Digital 14-42 (Four Thirds system, m.Zuiko Digital 14-42 (Micro Four Thirds system), Zuiko Digital 12-60, Leica DG Vario-Elmarit 12-60 mm f/2.8-4. I didn't use the 14-35 because I wanted a focal length of 42 mm for some of the photos. The photos I took were at full aperture at each end of the focal length range (12 or 14 mm and 42 mm). The long end ones all looked like this:
![]() |
|
The crops at top right are about as challenging as they could be. The third one (Zuiko 14-42) was truncated at the top because of a slip on my part: I didn't get anything higher on the shot:
![]() |
|
![]() |
|
|
![]() |
|
![]() |
|
![]() |
|
Is there any difference in sharpness? Possibly, but it's minimal. And this includes the lens that caused me concern 5 years ago. Next step is to investigate whether I had the AF point set incorrectly in the old photos.
A new kind of spam
|
Topic: technology, general, opinion | Link here |
Spam comes in many forms. In my view, from “best” to worst:
But there's a fourth category, probably less obnoxious than any of those: lately I'm getting more and more people wanting me to link to their pages in my diary. As I've noted before, clearly they using automatic scanners, and maybe even the emails are sent automatically. Here's a recent one:
Date: Mon, 26 Aug 2019 03:32:01 -0700
From: Watchideas <julian@watchideas.com>
Subject: Great Article About Wristwatches!
Hi real quick message for you,
It???s Julian here from Watchideas, a site dedicated to wristwatches.
I noticed that in your article http://lemis.com/grog/diary-sep2018.php you
referenced https://en.wikipedia.org/wiki/Quartz who were talking about
Watch Movements. I actually wrote a very similar article recently with tons
of research and great information that I thought might be useful to your
readers, and wondered if you would be interested in linking to it at all?
You can check it out here
...
OK, I'll bite. What reference to quartz in /grog/diary-sep2018.php? It's at “More garden work”:
These pots with white gravel (quartz?) in them seem to be designed to be eaten immediately, and I fear that it won't take root properly.
Now doesn't that just cry out about watches?
But it gets worse. Another one:
Date: Wed, 28 Aug 2019 01:13:09 +0000 (UTC)
From: Jill Moore <jillmoore@callersmart.co>
Subject: Super quick one for you
I???m emailing you because I found your page -
https://u10979531.ct.sendgrid.net/wf/click?upn=2UcajX-2BJg-2F-2Bbx7XhQ5wyUdtzaz4dk58Zv5B80gUHbbpsJtr9S3p4TBNRjtcl4R0GCeWo8itMnbHO9VmzpcMjdgXZ5qoB0FkGqjOnNwqY7p4-3D_ysbispYbGvrqAABvdctQi2-Bq8h7Vm8zn-2F9Qe5CpBEaBH98Py91sRtFIPRhhtZO3wz9EAHRnIZv06BkDRvI2t54921hsmsGr6BxEkvYuLChBeZOYukF0cQ0qI5bhM9TxL-2B-a2BABgZ4ShRmoQhMH5VGTTu3q06PA2TBvxPM5PAK1ExOsGQqpkzaHpx43y92tPqODUQh2wKNMxQfIoFFV14aBJg-3D-3D - which I
found very insightful.
We actually have a similar resource, which I think would make an excellent
addition to your page. Would you mind linking to it?
Here???s it is:
https://u10979531.ct.sendgrid.net/wf/click?upn=AlP-2FIxJDHseWPOxxeQjByPibV3wUlGSLpLHyLZJQTCz9c-2B1Ji6JgqcI-2F9-2Bf-2BnW9TdXvephjgZE-2BJYShRSyNS4Oi-2FaF7BSb3RkKBBp7hn1d8-3D_ysbispYbGvrqAABvdctQi-2Bq8h7Vm8zn-2F9Qe5CpBEaBH98Py91sRtFIPRhhtZO3wzncY9g3I3-2F+Y55WQs-2JF6haVAdF5wCuDvs-B2iYUnOI73FrDxgshwQxVlvDl9UmuYdDXKJOjc5ix9PpnrxyA2Iv4scq1rnhAGlMydNO9kSsms2t92rajFIESOJ-2BwR49GY69e6rI3gnlNiq90UKj5TwSILWA-3D-3D
In other words, until I view the HTML version (and doubtless confirm to her that I have looked at it) I don't even know what she's talking about. That's OK: I'm pretty sure I don't care. But what should I do with these things? Some of them might even be relevant—one can always hope.
Server setup, day 2
|
Topic: technology, opinion | Link here |
So how much time do I have to migrate my web server? It's the end of the month, and I pay RootBSD by the calendar month. In addition, the load average on www.lemis.com has dropped below 10, and things seem to be working acceptably. So it makes more sense to pay for www until the end of next month and take my time doing it right with the new server, including a completely new web server configuration file for the first time in probably 24 years.
First, though, a few setup issues. Emacs doesn't want to work the way I want: it adds this silly half-colour scheme (changes the foreground, doesn't change the background). How do I get rid of that? Compare other config files. This obvious code will do it:
;; disable color crap
(global-font-lock-mode -1)
But for some reason, the Meta key (remapped Alt key) doesn't work. Instead of M-f (word forward) I get æ. Why?
First, of course, there's the interface to Emacs. Under X it receives the individual keycodes with modifier keys, so M-f looks like this (from xev):
KeyPress event, serial 43, synthetic NO, window 0x3a00004,
root 0x985, subw 0x0, time 801502730, (156,106), root:(193,191),
state 0x8, keycode 41 (keysym 0x66, f), same_screen YES,
XLookupString gives 1 bytes: (66) "f"
XmbLookupString gives 1 bytes: (66) "f"
XFilterEvent returns: False
The important thing there is the state (of the modifier keys). On my system, Alt maps to bit 3 (8) of the modifiers. Emacs knows to treat this information as M-f.
But that's not the case here. I'm connecting to the machine via ssh, and running it in the same window as a shell. How does that look to Emacs? It can really only be getting the native characters, in this case f (0x66) with the sign bit set (0xe6). That's æ, of course, so inserting it is not the most stupid thing it could do. But it doesn't do that on other systems. What's the difference? Tried out various things:
Config file issues? There are a number of differences between what I have on eureka (where I frequently update the Emacs config) and the other remote servers. No worry, copy across from www to w3 and try again. No difference. So it can't be the config files.
Is it maybe the different release? On w3 I have Emacs 26, and on the other platforms Emacs 25. Take a look through the NEWS. Some intersting stuff there, but nothing relevant.
Could it be the stty settings? No, they're identical.
OK, ask the web: emacs meta key not working remote. Nope, lots of stuff that isn't relevant. Meta Key Problems on the EmacsWiki looked promising, but none of the suggestions matched.
OK, what else could it be? Can't be X configuration (no X). Not Emacs config. Probably not Emacs version. Environment variables? Took a look with set. Only on w3 did I have a locale setting (LC_ALL). OK, remove that. What happens? It works!
What does that mean in practice? My locale setting was en_AU.ISO8859-1. What alternatives do I have? en_AU.UTF-8 seems the obvious choice, and it works. I was concerned that it would break bash line editing, but that also seems to work. That looks like a problem solved, but somehow I fear there's a dragon lurking round the corner.
And the web server configuration? Mañana, tal vez pasado mañana.
Wednesday, 28 August 2019 | Dereel | |
Top of page | ||
previous day | ||
next day | ||
last day |
Increasing network traffic allowance
|
Topic: general, technology, opinion | Link here |
Six years ago I was connected to the Internet by an HSPA mobile link, and I had a traffic allowance of 9 GB per month. Then the National Broadband Network came, and we had 50 GB for much less money.
As these things go, we soon maxed out the 50 GB—downloading videos helps. What next? The next step was 250 GB, far more than we needed. But OK, the price difference wasn't much. And then, for no extra charge, the allowance was changed to 500 GB and then 600 GB, which I have (almost?) never managed to use.
But now I have a series of TV programmes to load, about 500 GB in all. Time to increase my allowance. Times have changed: now the minimum allowance is 100 GB, which costs $55, and there are steps all the way through $65 (my current 600 GB allowance) to $69 for unlimited traffic. Clearly the traffic is no longer the limiting factor in Internet access.
So what do I go for? Probably $68 for 900 GB would be enough, but we're only talking about $1. So I went off to the Aussie Broadband site to schedule a (free) change to my “plan” from next month (13 September). But no, I was able to start it immediately. Cost involved? $4. OK, I can do that.
But then I thought about it. The $4 are simply the price difference between the two “plans”. What this means is that I don't ever need to pay up front for unlimited traffic. If I find that I need it (or something in between) in the course of a month, I can just set it then. The obvious next step is for Aussie to simply (and optionally) charge the extra when a limit is reached. Or maybe we'll see traffic limitations disappear altogether.
Whence “command line”?
|
Topic: technology, language, opinion | Link here |
I've been using computers for nearly 50 years now, and for all that time my primary form of communication with them has been by text commands, usually imperatives with the syntax command parameter...: type something in to a computer, or punch it on a card in the olden days, and it will parse it and either execute what it thinks I said, or issue a rude remark.
Initially each individual program did that, which made switching difficult, but even then (unknown to me) there were top level command interpreters that took the commands and either executed them directly or started a program. Nowadays we call them shells (or people in the Microsoft call them terminals or “command line”).
Today I read an article: Command Lines: Why Do People Still Bother With Them?. OK, I know why, but let's read the article anyway:
The command line is almost 50 years old,...
Almost 50? The concept of interpreting text commands must go back to the mid-1950s. Of course, they didn't call it “command line” in those days, but neither did they 50 years ago. My guess was that the term arose in the mid-1980s when GUIs came into existence. Off to look at the Oxford English Dictionary, where I found:
Command line A prompt offered by an operating system or program for a user to enter textual commands. Frequently attributive.1971 K. Thompson & D. M. Ritchie Unix Programmer's Man. 3 Nov. Introd. 2 in cm.bell-labs.com (O.E.D. Archive): This directory is searched automatically by the command line interpreter.
OK, that fits “nearly 50 years”. But how do you parse “command line interpreter”? For me, that's a command interpreter (and clearly they were referring to the shell). But it's certainly there.
The next reference, though, is genuine:
1981 InfoWorld 12 Oct. 26/3: If you accidentally type bad data on a command line, it can be a real chore to correct.
But somehow that's still not the way it's used today, where it describes the entire interface and not just a single line. Only the next one, 27 years ago, shows the current meaning:
1992 UNIX Today! 17 Feb. 5/1: Start applications and interact with the operating system without using the command line.
And two of the three quotes are clearly Unix-related.
NBN fail!
|
Topic: technology, general, opinion | Link here |
Network outage this afternoon at 15:30. Only 10 minutes! And I was grateful. Clearly the National Broadband Network is training me. After all, they've threatened to disconnect me for weeks at a time, and they haven't followed through with the threat: today was only the third outage this month. But once I would have complained strongly for having an unexplained 10 minute outage.
And more good news from Aussie Broadband: tomorrow's 6 hour outage has been cancelled. Did they do it today instead?
New photography web site
|
Topic: photography, technology, opinion | Link here |
Mail on the Hugin forum today. They're talking about migration to something even worse than Google Groups, and Bruno Postle suggested pixls.us, which he finds a good resource for various reasons. Worth looking at; they host a lot of free software of which I have never heard, though possibly there's a good reason for that.
Finding the focus point
|
Topic: technology, photography, opinion | Link here |
So where did I have the focus set on the photos of that I discussed yesterday? I had some recollection that Olympus' latest software (now called Olympus Workspace, and of course with a completely different user interface from the now-obsolete Olympus Viewer 3, which itself obsoleted “Olympus Master 2”, now so old and crufty that their web site denies all knowledge of it.
How do I display the focus point? I couldn't find out: everything has changed. Went searching on the web. It seems that you can't. Viewer? I couldn't find out how to do it there either. But while searching I discovered that various software can do it, notably a product called PhotoME, also advertised here. I must avoid Softonic: they just tried to get me to download some unrelated anti-virus software.
But that's for another day. Also discovered that the information is stored in perfectly normal (I think) Exif data. In the case of this photo:
![]() |
|
I found these tags:
=== grog@eureka (/dev/pts/14) ~/Photos/20140626 123 -> exiftool Walking-dogs-8.jpeg | grep AF
How much of that information is relevant? AF Point “Left (or n/a)” seems to contradict the AF Point Selected information. And how do I set AF Fine Tune? But it does look as if I had it set on the middle of the frame, and somehow managed to hit the background. I wonder if a larger group would help.
Thursday, 29 August 2019 | Dereel | Images for 29 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
NBN giveth, NBN taketh away
|
Topic: technology, general, opinion | Link here |
Yesterday's NBN good news was just a drop in the ocean. Shortly later I received no fewer than three messages:
NBNCo has let us know that they are planning network maintenance in your area, and that your service at <strong>29 STONES RD, DEREEL VIC</strong> will be affected.<br>
- Start date and time: Mon 16th September 2019 07:00 AEST
- End date and time: Fri 20th September 2019 20:00 AEST
- Window: 109.0 hours
You may experience the following interruptions during the maintenance
- 480 min
- 480 min
- 480 min
- 480 min
- 480 min
- Start date and time: Mon 30th September 2019 07:00 AEST
- End date and time: Wed 2nd October 2019 20:00 AEST
- Window: 61.0 hours
You may experience the following interruptions during the maintenance
- 480 min
- Start date and time: Mon 23rd September 2019 07:00 AEST
- End date and time: Sat 28th September 2019 20:00 AEST
- Window: 133.0 hours
You may experience the following interruptions during the maintenance
- 480 min
- 480 min
- 480 min
- 480 min
- 480 min
Those are just new outage notices. The total looks like this (from the web site, and unsorted):
NBN Scheduled Outage
02-09-2019 07:00:00AM
Start Time
09-09-2019 08:00:00PM
End Time
NBN Scheduled Outage
16-09-2019 07:00:00AM
Start Time
20-09-2019 08:00:00PM
End Time
NBN Scheduled Outage
23-09-2019 07:00:00AM
Start Time
28-09-2019 08:00:00PM
End Time
NBN Scheduled Outage
30-09-2019 07:00:00AM
Start Time
02-10-2019 08:00:00PM
End Time
NBN Scheduled Outage
26-08-2019 07:00:00AM
Start Time
01-09-2019 08:00:00PM
End Time
NBN Scheduled Outage
16-09-2019 07:00:00AM
Start Time
18-09-2019 08:00:00PM
End Time
NBN Scheduled Outage
05-09-2019 12:00:00AM
Start Time
07-09-2019 06:00:00AM
End Time
That's difficult to summarize, and it doesn't include the times. Going through the list of email messages I have received, I have:
Su | Mo | Tu | We | Th | Fr | Sa |
1: 8 hours | 2: 8 hours | 3: 8 hours | 4: 8 hours | 5: 8 hours, 1½ hours | 6: 8 hours, 1½ hours | 7: 8 hours, 1½ hours |
8: 8 hours | 9: 8 hours | 10 | 11 | 12 | 13 | 14 |
15 | 16: 8 hours, 1½ hours | 17: 8 hours, 1½ hours | 18: 8 hours, 1½ hours | 19: 8 hours | 20: 8 hours | 21 |
22 | 23: 8 hours | 24: 8 hours | 25: 8 hours | 26: 8 hours | 27: 8 hours | 28: 8 hours |
29 | 30: 8 hours |
Putting it differently, that's 21 out of 30 days in September, and 17 out of 21 work days. Only the week of 9 September has a few days where (currently) no outage is planned. Maybe they just forgot to send a notification. And on 6 days they have announced two outages of different duration. That's a total of 161 hours of outages! Yes, I know they won't be that bad, but they could fall well short of that sum and still be terrible. I get the feeling that the NBN has chosen this zone for various teams to play around with.
This has been going on for over two years. When will they admit that they can't get it to work reliably, and replace it with fibre?
More wildflowers
|
Topic: gardening, photography, opinion | Link here |
While walking the dogs (when else?) came across this bush:
![]() |
|
![]() |
|
Well, I thought it was a bush. Looking more carefully it seems to be a creeper climbing up the Acacia myrtifolia that is just trying to flower on the left. I should examine it more carefully.
Also on the walk picked up some of the flowers (weeds?) that I had noticed last week, this time with a clump of soil in the hope that they wouldn't wilt too quickly. Last time I had thought that these two colours represented different states of maturity in the flowers. But looking more carefully, they seem to be different (sub)species. Here details of the purple ones:
![]() |
|
![]() |
|
![]() |
|
And here the white ones.
![]() |
|
![]() |
|
![]() |
|
The individual flowers are about 1 cm long in each case.
What are they? Should I try to cultivate them here?
From a photographic point of view, I took these photos with the M.Zuiko Digital ED 60 mm f/2.8 Macro and the mecablitz 15 MS-1 digital . That's still relatively new. How did it work with Real Live close-up macros?
Parts of it were excellent. In principle the TTL exposure worked. But I didn't have enough light! For the real close-ups I used f/16, and to get a correct exposure I had to increase the ISO sensitivity to 800/30°.
Why? The flash was about 10 cm from the subject. At 100/21° it should have a guide number of 15, which makes 21 at 200/24°, so at that distance I should be OK for up to f/210. OK, this was a real close-up, divide by 3. That's still v/70.
My guess was that the flash isn't designed to be quite that close. There are tabs on the side to adjust the flash direction, and I suspected that they couldn't quite make it that close. But the instructions talk about distances as close as 2 cm. Did I maybe overdo it? Next time I'll do comparative shots.
PhotoME and focus point
|
Topic: photography, technology, opinion | Link here |
Installed PhotoME today and took a look at the out-of-focus photo that I've been looking at:
![]() |
|
ME stands for Metadata (in other words, Exif) editor, so it's not surprising that the screen is full of Exif information:
![]() |
|
But there's a barely visible thumbnail image there, one that really warrants that description:
![]() |
|
It doesn't seem to be enlargeable, and as it is it's not much use: I can barely recognize the area, though it does seem to be mainly on the foreground. That's nothing against PhotoME, of course; the feature is pretty much on the sidelines. But wouldn't it be nice to find good software that shows the focus point?
Friday, 30 August 2019 | Dereel | Images for 30 August 2019 |
Top of page | ||
previous day | ||
next day | ||
last day |
Goodbye, Yvonne
|
Topic: general | Link here |
Off to Ballarat with Yvonne this morning. She's off to Coolangatta or surrounds for a weekend seminar. The seminar itself takes two days, but she needs two more for travel. We left home at 9:15 for a 10:00 shuttle to Melbourne Airport, where, due to traffic delays, she barely made it on time for a 12:30 flight, getting her to Coolangatta at 14:30. And on Monday it'll the same thing in reverse—she won't be home until about 20:00.
While in town, dropped in at the new Bunnings market in the Delacombe Town Centre, which is now open. It seems that it's their biggest centre in all Australia, and it's certainly a bit bigger than the Ballarat facility. No photos: the light was wrong.
Bloody NBN!
|
Topic: technology, general, opinion | Link here |
The National Broadband Network kept its word and didn't cause any trouble yesterday. Today was a different matter, though: when I got home I discovered that we had been off the net since 9:55, and they kept it that way until 12:42. And in the course of the afternoon there were two further outages, keeping me on my toes until 17:45, a total of just shy of 4 hours of outages.
What are they doing? Are they completely incompetent? If they're having so much trouble with their equipment, why don't they replace it?
Spring on its way
|
Topic: general, gardening | Link here |
Winter is almost over, at least according to the calendar. But today was sunnier and milder, and the temperature hit 20.4°. And the trees are gradually flowering more:
![]() |
|
And so is the Oxalis:
![]() |
|
Who needs shoes?
|
Topic: health, animals | Link here |
I don't wear shoes. Well, almost never. The last time was at my mother's funeral, and I can't recall the time before that; it must be years.
But now with Yvonne away I have to feed the horses. I recall that one of the reasons that we left Germany was because of the horrible mess in the horse paddocks in the winter. But this year it's not much better here:
![]() |
|
![]() |
|
Tried going out there in thongs this morning, but that was clearly not the way to go. So boots or shoes it is. But which? I had a pair of boots years ago that weren't too difficult to use, but all Yvonne found was a pair I bought back in June 1973 or so, and they have laces to add to the general feeling of unhappiness. In the end I decided on a pair of shoes that I could just pull on (with the aid of a shoe horn).
But it proves that the real issue is elsewhere: socks. I was never good at touching my toes, even as a boy, but at my current advanced age just putting the socks on requires an effort. And as a result I leave them on all day. How I miss Yvonne!
Fixing the garage door opener
|
Topic: Stones Road house, general | Link here |
We've had problems with the garage door opener since we moved in to the house, and I had been told that they were due to inadequate lubrication. They fixed (worked around?) the problem with lubrication at the time, and when it started again recently I went looking for grease, but that seems to be hard to find nowadays.
More examination. My original concern 4 years ago confirmed itself: there's not much to grease on the rollers, and the rollers normally turn free, but in certain places they jam. And how about that, the rail was incorrectly positioned. Here on the left (seen from inside the garage, and where the issue occurs) and right:
![]() |
|
![]() |
|
![]() |
|
![]() |
|
That's a difference 2.2 cm. Move the rail away from the wall, and all was well.
Now why didn't the installers see that four years ago, although I pointed them at it?
Saturday, 31 August 2019 | Dereel | Images for 31 August 2019 |
Top of page | ||
previous day |
Extreme distortion!
|
Topic: photography, opinion | Link here |
While looking through some old diary entries, found this:
![]() |
|
![]() |
|
What appalling barrel distortion! What did I process it with? Oh, DxO Optics PRO. Why didn't it correct the distortion? Tried again with DxO PhotoLab. No improvement. Even manual correction wasn't completely successful:
![]() |
|
This was taken with the Olympus E-510 and the first Zuiko Digital ED 14-42 mm f/3.5-5.6 lens, neither of which I have any more. But I have the new E-30 and a new 14-42 lens. That should be close enough. More experiments:
![]() |
|
Yes, there was some minor barrel distortion in the original, but PhotoLab corrected it nicely. Was the old lens somehow defective? I took plenty of photos with it, and only these ones caused problems.
Then it occurred to me: there is no barrel distortion. That's the way the monitor looked: 12 years ago they were all CRTs, and this was probably the worst one that I had.
Spring coming
|
Topic: gardening, opinion | Link here |
The Camellia japonica in front of the house is now flowering relatively well:
![]() |
|
Well, I thought so, until I saw the neighbours' flowers:
![]() |
|
![]() |
|
Why do things grow so badly here?
Analemma again
|
Topic: photography, opinion | Link here |
The weather is getting better, and there are more opportunities for taking photos of the sun at noon. But I still haven't found out how. It seems that I need a neutral density filter of in the order of 10 stops, and the ones I have found are surprisingly expensive. What if I just take a photo of the sun at minimum exposure, f/22 at 1/8000 s?
![]() |
|
Still too bright; here's a shot taken at f/8 and 1/1000 s with the infrared filter, 6 EV less:
![]() |
|
And even here there are issues: the sun is distorted. It's not always the same direction:
![]() |
|
![]() |
|
Is that something like camera shake? It seems unlikely at those shutter speeds. Maybe I should fake it and just use the sun photos for the position, then put in a different image in the same place. I never expected this to be so difficult.
Another power failure
|
Topic: general | Link here |
Another 5 second power failure at 14:09:35.
Closing the loop in Enfield State Park
|
Topic: general, animals, opinion | Link here |
Two weeks ago we tried to close the loop between two of our walks in Enfield State Park, from the north:
![]() |
|
![]() |
|
But Yvonne didn't want to walk through the uncharted forest. OK, she's not here this weekend, so today I decided to try it from the other direction. A good thing I did, too. About 100 m from where we stopped last time there's a gate, and unusually for this part of the world, it's locked with a relatively new padlock:
![]() |
|
![]() |
|
![]() |
|
Beyond the gate is the gully with a dam at the bottom, and then the way back up to the northern half of the loop. But clearly it's not for me.
|
Back along a slightly different way, where there are some badly protected mining shafts:
![]() |
|
![]() |
|
Defrosting with microwave ovens
|
Topic: food and drink, opinion | Link here |
Chris Bahlo had a couple of uninvited guest sheep a few months back, and she couldn't find out who they belonged to. The law is clear on that: they belonged to her. Then she met a butcher, with the result that we all now have plenty of lamb meat in the freezer. Today I decided to use one piece to make some dinner. Hong Kong Curry Lamb? There don't seem to be any good recipes out there. And of course I left it too late to thaw. But that's what microwave ovens are for, right? Well...
The new Samsung microwave oven has a defrost function, of course. Tell it what you've put in there (“meat/roast”) the weight (1 kg) and off it goes. 7:30 minutes! At what power? Press on “power level” and it obligingly shows: 900 W! That would cook it, not thaw it.
It's very likely that the program would gradually reduce the power level, but I didn't want to take the risk. Gave it 4 minutes at 500 W, by which time the extremities were getting hot. Gave it up as a bad job, put it in the fridge to thaw naturally, and cooked a beef rendang instead, which didn't taste very exciting.
Bloody kangaroos!
|
Topic: animals | Link here |
We're infested with kangaroos again.
![]() |
|
This one was only 30 m from the lounge room door:
![]() |
|
Do you have a comment about something I have written? This is a diary, not a “blog”, and there is deliberately no provision for directly adding comments. It's also not a vehicle for third-party content. But I welcome feedback and try to reply to all messages I receive. See the diary overview for more details. If you do send me a message relating to something I have written, please indicate whether you'd prefer me not to mention your name. Otherwise I'll assume that it's OK to do so.
Top of page | Previous month | Greg's home page | Today's diary entry | Next month | Greg's photos | Copyright information |